How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

What can delay tray signs in Coventry?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Do you work across the West Midlands or only in Coventry?

Across all of the West Midlands, and the rest of the UK too. Coventry is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

Why is there a price range for tray signs rather than one figure?

Because jobs vary. The guide of £1,250 to £3,450 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Coventry.

Can I change the lettering later?

That depends on the lettering method. Vinyl can be removed and replaced on site. Raised acrylic letters can be unscrewed and swapped, leaving holes to fill. Routed letters are cut into the face, so a change normally means a new tray face, which is worth knowing before you choose.

Tray signs in Coventry

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Tray signs in Coventry: the practical benefits

Businesses moving into a refurbished Coventry building can use a wrap-around tray to hide an uneven old fascia without stripping it out.
If your Coventry premises might open into the evening one day, a light-ready tray avoids paying for a second sign later.
A modern Coventry retail park unit with grey cladding suits a powder-coated tray matched to the window frames' RAL colour.

What tray signs cost in Coventry

Here is the price picture for tray signs in Coventry: a guide of £1,250 to £3,450 per sign, with VAT on top. The rows below give more detail. A survey or artwork check comes first, and then we confirm the price in writing.

Tray signs in Coventry: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Options for your Coventry project

Light-ready tray

Deep enough for LED modules, with cable entry agreed, fitted unlit for now.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Wrap-around tray

Sized to the whole fascia with folded ends, hiding the old board.

Do you need permission for a sign in Coventry?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Coventry and the West Midlands

Jobs in Coventry are handled the same way as jobs anywhere else in the West Midlands: one team, one process. If the work calls for a survey, we book a visit at a time that suits you. If photos and sizes will do, we quote from those and skip the visit altogether. Addresses in CV1, CV3, CV5 and CV6 are all within our Coventry coverage. Coventry lies around 17 miles east of Birmingham.

Also within reach of Coventry

If tray signs could help your business in Coventry, the quote is free. Send pictures and sizes by form, phone or WhatsApp, and you will have a scaled design to approve before any work goes ahead.

More signs in Coventry

All sign types in Coventry · Tray signs across the West Midlands

Typical lifespan	Many years; powder coat weathers better than wet paint
Consent	Non-lit often deemed in England within limits; lit versions commonly need express consent
Materials	Folded aluminium with 50–75 mm returns, powder coated; acrylic or vinyl lettering