How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Why is there a price range for tray signs rather than one figure?

Because jobs vary. The guide of £1,250 to £3,450 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Kenilworth.

Is Kenilworth inside your coverage area for tray signs?

It is. We work throughout the UK rather than in a single region, so Kenilworth and every part of Warwickshire are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

Could the consent process affect the timing of my job in Kenilworth?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

Can I change the lettering later?

That depends on the lettering method. Vinyl can be removed and replaced on site. Raised acrylic letters can be unscrewed and swapped, leaving holes to fill. Routed letters are cut into the face, so a change normally means a new tray face, which is worth knowing before you choose.

Tray signs in Kenilworth

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

The case for tray signs in Kenilworth

Businesses moving into a refurbished Kenilworth building can use a wrap-around tray to hide an uneven old fascia without stripping it out.
If your Kenilworth premises might open into the evening one day, a light-ready tray avoids paying for a second sign later.
An estate agent in Kenilworth may change window displays weekly but keep the fascia for years, which is where a durable powder coat pays back.

What tray signs cost in Kenilworth

Use these figures to budget: £1,250 to £3,450 per sign is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Tray signs in Kenilworth: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Length matters most, because longer trays need joints, more coating and more fixing rail. Then come the lettering method, letter count, special or metallic powder coats, access height and removal of the old sign. Every figure is confirmed after survey and an artwork check.

Options for your Kenilworth project

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Wrap-around tray

Sized to the whole fascia with folded ends, hiding the old board.

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Do you need permission for a sign in Kenilworth?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Kenilworth and Warwickshire

You do not need to be in a particular postcode for us to help: Kenilworth and the whole of Warwickshire are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead. In postcode terms, Kenilworth jobs typically fall in CV8. Kenilworth is about 13 miles south of Nuneaton.

Nearby towns we also cover

If tray signs could help your business in Kenilworth, the quote is free. Send pictures and sizes by form, phone or WhatsApp, and you will have a scaled design to approve before any work goes ahead.

More signs in Kenilworth

All sign types in Kenilworth · Tray signs across Warwickshire

Materials	Folded aluminium with 50–75 mm returns, powder coated; acrylic or vinyl lettering
Consent	Non-lit often deemed in England within limits; lit versions commonly need express consent
Typical lead time	typically 3–4 weeks from proof approval, allowing for folding and coating