What can delay tray signs in Telford?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

How much should I budget for tray signs in Telford?

As a guide, £1,250–£3,450 per sign + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Can you handle tray signs for a business in Telford?

Yes. Smart Signs covers Telford and the rest of Shropshire as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Tray signs in Shropshire

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Why choose tray signs in Shropshire?

Professional practices in Telford, such as dentists, opticians and solicitors, may prefer a tray because a clean folded edge suggests care.
Where several Telford shops share a parade, a charcoal tray with white letters stands apart from the printed panels around it.
Shoppers walking along a Telford pavement see a sign side-on first, and tray returns give it a solid edge from exactly that angle.

Guide prices in Shropshire

Use these figures to budget: £1,250 to £3,450 per sign is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Tray signs in Shropshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Length matters most, because longer trays need joints, more coating and more fixing rail. Then come the lettering method, letter count, special or metallic powder coats, access height and removal of the old sign. Every figure is confirmed after survey and an artwork check.

Do you need permission for a sign in Shropshire?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Options worth considering

Tray with raised acrylic letters

Solid acrylic letters fixed proud of the face for depth and shadow.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Light-ready tray

Deep enough for LED modules, with cable entry agreed, fitted unlit for now.

Towns in Shropshire

We take on tray signs in all of these towns across Shropshire, and in the smaller places, estates and business parks between them. Select a town to open its own page.

Get a free price for tray signs in Shropshire. Use the quote form, phone or WhatsApp, include a few pictures and measurements, and we will send a written quote followed by a design for your approval.