What will an LED retrofit save?

It depends on the old tubes, the hours lit and your electricity rate, but LED modules draw much less power for the same face. There are no tubes, starters or ballasts to replace either. Ask for old and new wattages to compare.

Do trough lights work on raised letters?

Yes, though they cast small shadows below each letter, which can add depth. Fittings on longer arms soften the shadows, and the survey checks the letter depth and projection so the wash still reaches the lower part of the sign.

Could the consent process affect the timing of my job in Telford?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Can sign lighting be dimmed?

Yes, if dimmable drivers or fittings are specified. Dimming lets the brightness be set on site to suit the street, which helps where a consent condition limits brightness or neighbours live close by. Fixed-output fittings can't be dimmed later without swapping drivers.

Can you handle sign lighting and LED upgrades for a business in Telford?

Yes. Smart Signs covers Telford and the rest of Shropshire as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

Why is there a price range for sign lighting and LED upgrades rather than one figure?

Because jobs vary. The guide of £295 to £1,450 per fascia + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Telford.

Sign lighting and LED upgrades in Shropshire

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Why choose sign lighting and LED upgrades in Shropshire?

An old fluorescent lightbox on a Telford parade can be converted to LED, cutting running costs and tube changes.
Closing before the Telford evening rush? A timer keeps the sign lit while commuters pass, then switches off.
Pubs in Telford with traditional painted boards can add swan-neck spotlights that suit the period look of the frontage.

Guide prices in Shropshire

The table shows guide prices for sign lighting and LED upgrades, starting from £295 and reaching about £1,450 per fascia. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

Sign lighting & LED upgrades in Shropshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
LED trough light, up to 3 m	£295 – £750	£354 – £900
Spotlights (set of 3–4)	£345 – £895	£414 – £1,074
LED retrofit of an old fluorescent lightbox	£295 – £1,450	£354 – £1,740

Guide prices: £295–£750 + VAT for an LED trough light up to 3 m, £345–£895 + VAT for a set of 3–4 spotlights, and £295–£1,450 + VAT to retrofit an old fluorescent lightbox with LEDs. Prices exclude VAT and are confirmed after survey.

Consent for illuminated signs in Shropshire

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Options worth considering

LED lightbox retrofit

Tubes and ballasts swapped for LED modules and a new driver.

Linear wall washer

A low-profile bar grazing light across the sign.

Swan-neck spotlights

Curved arms with LED heads; suits painted and heritage fascias.

Towns in Shropshire

Main towns in Shropshire where we design, make and fit signage, including sign lighting and LED upgrades. Select yours, or simply get in touch if your town or village is missing from the list.

Ready when you are. Request a free quote for sign lighting and LED upgrades in Shropshire and attach whatever you have: snapshots, dimensions, a logo file. We send a scaled drawing, and nothing goes ahead without your sign-off.