Smart Signs logo

Tray signs · Burnley

Tray signs in Burnley

Your enquiry about tray signs in Burnley goes to one team that handles everything: measuring, artwork, the consent check, the proof, the price and the arrangements for making and fitting. We work right across the UK rather than from a single patch, which is why the process described on this page is the same in Burnley as it is throughout Lancashire.

From £1,250 per sign + VAT · UK guide price
Charcoal tray sign with raised white letters 'MERIDIAN DENTAL' over a modern unit entrance.

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Practical reasons to consider tray signs in Burnley

  • A modern Burnley retail park unit with grey cladding suits a powder-coated tray matched to the window frames' RAL colour.
  • Shoppers walking along a Burnley pavement see a sign side-on first, and tray returns give it a solid edge from exactly that angle.
  • Businesses moving into a refurbished Burnley building can use a wrap-around tray to hide an uneven old fascia without stripping it out.

What tray signs cost in Burnley

The table shows guide prices for tray signs, starting from £1,250 and reaching about £3,450 per sign. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

Tray signs in Burnley: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Tray sign up to 3 m, vinyl lettering£1,250 – £2,100£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering£1,850 – £3,450£2,220 – £4,140
Push-through or routed letters (non-lit)£350 – £950£420 – £1,140

Length matters most, because longer trays need joints, more coating and more fixing rail. Then come the lettering method, letter count, special or metallic powder coats, access height and removal of the old sign. Every figure is confirmed after survey and an artwork check.

Options for your Burnley project

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Do you need permission for a sign in Burnley?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Burnley and Lancashire

From the middle of Burnley to the edges of Lancashire, the same survey, proof and fit process applies. If the job calls for someone on site, a visit is booked; if not, we price from photos, measurements and your artwork, then confirm the details once the artwork is checked. Addresses in BB10, BB11, BB12 and BB9 are all within our Burnley coverage. Burnley is about 19 miles east of Preston.

Close to Burnley

Free quotes for tray signs start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Burnley

All sign types in Burnley · Tray signs across Lancashire

Tray signs in Burnley: questions

What colour should the tray be?

Pick a colour that contrasts strongly with your lettering and suits the frontage. Charcoal, anthracite and black with white or metallic letters read clearly on most buildings, while light trays with dark letters suit darker brick. Matching the RAL colour of your window frames gives a coordinated look.

Do you cover smaller places near Burnley as well?

Yes. Our coverage is not limited to Burnley itself: nearby towns, industrial estates and business parks across Lancashire are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Can I get a fixed price for tray signs in Burnley before committing?

Yes. We start from the guide range, £1,250 to £3,450 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Do tray signs suit office buildings and business parks?

Yes. Trays suit entrances, canopies and plain cladding as well as shop fascias, and can be fixed to brick, render or cladding rails. For cladding we confirm the fixing method with the building owner first, since drilling some panel systems can affect how they perform.

When could work on tray signs go ahead in Burnley?

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote