Can a tray sign cover an old fascia completely?

Yes, in most cases. A tray can be sized to the full fascia board with folded ends that wrap the corners, hiding the old timber. We still check the board is sound and fix through to solid structure, because hidden rot can loosen fixings over time.

Does the price of tray signs in Preston include VAT?

No. Our guide range of £1,250–£3,450 per sign excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

Could the consent process affect the timing of my job in Preston?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What do you need from me to quote for tray signs in Preston?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Tray signs in Lancashire

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Why choose tray signs in Lancashire?

An estate agent in Preston may change window displays weekly but keep the fascia for years, which is where a durable powder coat pays back.
Shoppers walking along a Preston pavement see a sign side-on first, and tray returns give it a solid edge from exactly that angle.
A modern Preston retail park unit with grey cladding suits a powder-coated tray matched to the window frames' RAL colour.

Guide prices in Lancashire

How much? Expect a guide range of £1,250–£3,450 per sign, VAT excluded. The rows below show what moves a job up or down that range, and the figure becomes firm once the survey or artwork check is done.

Tray signs in Lancashire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Do you need permission for a sign in Lancashire?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Options worth considering

Light-ready tray

Deep enough for LED modules, with cable entry agreed, fitted unlit for now.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Towns in Lancashire

Main towns in Lancashire where we design, make and fit signage, including tray signs. Select yours, or simply get in touch if your town or village is missing from the list.

Whether your business is in a busy centre or a quieter corner of Lancashire, getting a quote for tray signs is free. Share photos and sizes, then approve the proof before anything is made.