Smart Signs logo

Tray signs · Mold

Tray signs in Mold

Need tray signs in Mold? Start with a few photos and rough sizes. From there we work out the materials, check whether any consent rules apply, draw up a design to scale and give you a written price. Nothing is made until you approve it. Smart Signs designs, makes and fits signage nationwide, and Mold sits comfortably inside that coverage.

From £1,250 per sign + VAT · UK guide price
Charcoal tray sign with raised white letters 'MERIDIAN DENTAL' over a modern unit entrance.

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Reasons to choose tray signs in Mold

  • Where several Mold shops share a parade, a charcoal tray with white letters stands apart from the printed panels around it.
  • A modern Mold retail park unit with grey cladding suits a powder-coated tray matched to the window frames' RAL colour.
  • If your Mold premises might open into the evening one day, a light-ready tray avoids paying for a second sign later.

What tray signs cost in Mold

Guide prices for tray signs run from £1,250 to £3,450 per sign, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Tray signs in Mold: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Tray sign up to 3 m, vinyl lettering£1,250 – £2,100£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering£1,850 – £3,450£2,220 – £4,140
Push-through or routed letters (non-lit)£350 – £950£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Options for your Mold project

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Tray with raised acrylic letters

Solid acrylic letters fixed proud of the face for depth and shadow.

Wrap-around tray

Sized to the whole fascia with folded ends, hiding the old board.

Do you need permission for a sign in Mold?

Wales still uses the Town and Country Planning (Control of Advertisements) Regulations 1992, as amended. The system looks similar to England's, with some signs allowed under deemed consent and others needing express consent from the council, but the details differ, so we check with the local planning authority rather than assume English limits apply. On a listed building, listed building consent is usually needed as well, and works without it can be a criminal offence. We look at your premises before you commit and can prepare drawings and photos for an application, or submit it for you.

Covering Mold and Clwyd

You do not need to be in a particular postcode for us to help: Mold and the whole of Clwyd are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead. Around Mold, that covers postcode districts such as CH7. Roughly 10 miles separate Mold from Wrexham, which lies to the south-east.

Nearby towns we also cover

Ready to price tray signs in Mold? Send a few photos and rough sizes through the form or WhatsApp. The quote is free, and you will see a proof to scale before anything is made.

More signs in Mold

All sign types in Mold · Tray signs across Clwyd

Tray signs in Mold: questions

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

Can I change the lettering later?

That depends on the lettering method. Vinyl can be removed and replaced on site. Raised acrylic letters can be unscrewed and swapped, leaving holes to fill. Routed letters are cut into the face, so a change normally means a new tray face, which is worth knowing before you choose.

Is Mold inside your coverage area for tray signs?

It is. We work throughout the UK rather than in a single region, so Mold and every part of Clwyd are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

What makes tray signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Mold is £1,250–£3,450 per sign + VAT, confirmed after a survey or artwork check.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

How soon after I approve the proof can the work on tray signs happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Mold once materials are ordered.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote