Car wraps and colour change in Mold

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

It helps. While the film is on, it shields the paint from sun fade, light scuffs and bird droppings, which is one reason some owners of newer cars choose a wrap over a respray. It isn't armour, though: a sharp stone or a car-park knock can still mark the film and occasionally the paint below.

Yes. We start from the guide range, £1,950 to £3,750 per car excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Usually, yes. Factory paint on a new car is normally the ideal base, because it's fully bonded and free of chips. The car still needs a thorough wash and decontamination before fitting so the film sticks properly. A panel that has been resprayed, even on a nearly new car, usually needs time to cure before it can be wrapped.

A full colour change typically takes 2–4 days of fitting, and longer when door shuts are included or a lot of trim has to come off. Part wraps such as a roof or mirrors typically take a few hours to a day. The car needs to be clean, dry and indoors throughout, so plan for it to be away for the whole job.