Can the existing wiring be reused?

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

What do you need from me to quote for lightbox signs in Swansea?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Why does our old lightbox flicker?

In an older box it's usually failing fluorescent tubes, starters or ballasts, and replacing them one at a time rarely lasts. Patchy light can also mean water has got in. Converting the box to LED fixes the cause, if the frame is sound.

Could the consent process affect the timing of my job in Swansea?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What makes lightbox signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Swansea is £1,250–£4,800 per lightbox + VAT, confirmed after a survey or artwork check.

How long does a printed face last?

Several years in most positions, though colours fade noticeably faster on a sunny south-facing frontage. Laminates and UV-resistant inks help slow fading, and reds and yellows usually go first. A box that's easy to re-face keeps future rebrands and refreshes affordable.

Lightbox signs in Swansea

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

The case for lightbox signs in Swansea

When an old fluorescent box above a Swansea shop flickers, an LED conversion can cost far less than a new sign.
Businesses with several sites across West Glamorgan can share one set of artwork, so the Swansea branch matches the rest.
If a Swansea convenience store or pharmacy has a sound box frame, a new face refreshes the frontage for less.

What lightbox signs cost in Swansea

Pricing for lightbox signs is worked out job by job, but the guide range is £1,250 to £4,800 per lightbox + VAT. The table lists typical options. Your figure is confirmed only after a site survey or a check of the artwork you send.

Lightbox signs in Swansea: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lightbox up to 3 m, printed face	£1,250 – £2,650	£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters	£2,450 – £4,800	£2,940 – £5,760
Replacement face for an existing lightbox	£295 – £950	£354 – £1,140

Length and face type drive most of the price; shaped or double-sided boxes, old-cabinet removal, fascia repairs, access equipment and consent drawings add to it.

Options for your Swansea project

Routed push-through face

Only the lettering glows, standing slightly proud of the face.

Printed flex face

Joint-free over long spans and simple to re-print later.

Shaped lightbox

Made to a logo or roundel outline instead of a rectangle.

Consent for illuminated signs in Swansea

Wales has its own advertisement regulations, and a lit sign is the case where they matter most. Internally illuminated, halo-lit and lit projecting signs typically need express consent, and on listed buildings or in conservation areas the council is likely to look closely at size, light levels and fixings. Keep illumination static and moderate; PLG05 from the Institution of Lighting Professionals is the usual reference. LED modules and drivers run at low voltage, but the mains connection still needs an electrician working to BS 7671. We check before you commit and can prepare or submit the consent application.

Covering Swansea and West Glamorgan

Yes, Swansea is covered, as is the rest of West Glamorgan. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Addresses in SA1, SA5 and SA2 are all within our Swansea coverage.

Nearby towns we also cover

Get a free quote for lightbox signs: tell us what you need, attach pictures and approximate measurements, and we will come back with a price. Nothing is produced until you have approved the design proof.

More signs in Swansea

All sign types in Swansea · Lightbox signs across West Glamorgan

Typical lead time	typically 2–4 weeks after proof approval, plus consent
Typical size	Up to about 5 m long; often 100–150 mm deep
Typical lifespan	LEDs often manufacturer-rated around 50,000 hours; prints fade sooner