How do you look after halo letters?

Clean metal faces gently with a soft cloth and mild detergent a few times a year, avoiding abrasive pads on brushed or mirror finishes. Check the clear backs for trapped dirt or insects. If a halo dims or goes patchy, the driver is the usual suspect.

Can halo letters go on dark brick?

They can, but the halo will be faint because dark surfaces absorb light. The usual answer is a pale backing panel behind the letters, giving the glow a clean surface. Face-and-halo letters are another option, where the lit face does most of the work.

How far off the wall do halo letters sit?

Usually 25–50 mm. Closer gives a tight, bright outline; further gives a softer, wider glow and makes the letters seem to float. Larger letters generally sit further out. The distance is set on the drawings and fine-tuned on the locators during fitting.

What makes halo-lit letters more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Swansea is £160–£420 per letter + VAT, confirmed after a survey or artwork check.

What do you need from me to quote for halo-lit letters in Swansea?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Is there a typical lead time for halo-lit letters in Swansea?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Halo-lit letters in Swansea

Halo-lit letters are solid-faced fabricated letters with LEDs inside that shine backwards onto the wall, so each letter stands in silhouette against a soft outline of light.

Reasons to choose halo-lit letters in Swansea

At a Swansea hotel entrance, brushed steel or brass halo letters read as part of the building's architecture.
A restaurant or wine bar in Swansea can light its name after dark without a glowing box, using halo letters.
Even a dark-brick unit in Swansea can carry a crisp halo once the letters sit on a pale backing panel.

What halo-lit letters cost in Swansea

Budgeting for halo-lit letters? The guide below runs from £160 to £420 per letter. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Halo-lit letters in Swansea: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Halo-lit letter, 300–600 mm	£160 – £420	£192 – £504
Typical business name (10–14 letters)	£2,800 – £9,800	£3,360 – £11,760
Final electrical connection by an electrician	£150 – £350	£180 – £420

Metal and finish matter most: brass, bronze and mirror cost more than painted or brushed. Face-and-halo letters, backing panels, stone drilling and access equipment add to the total.

Options for your Swansea project

Brass or bronze

Warm faces for hospitality, lacquered to slow tarnishing.

Face-and-halo

An opal face plus a lit wall, for longer viewing distances.

Backing panel

A pale panel behind the letters for dark or rough walls.

Consent for illuminated signs in Swansea

Illuminated fascia and projecting signs in Wales usually need express consent from the council under the Town and Country Planning (Control of Advertisements) Regulations 1992, as amended. Because the Welsh rules differ in detail from England's, we check with the planning authority what applies to your building, especially in a conservation area or on a listed building, where listed building consent may also be needed. Councils commonly look at brightness against the ILP's PLG05 guidance and expect static lighting. The final connection to the mains is made by an electrician to BS 7671, and you receive the certificate. We prepare the drawings and photos, or submit the application for you.

Covering Swansea and West Glamorgan

Wherever you are in West Glamorgan, Swansea included, the service is identical. We arrange a survey when the sign is fixed to a building or needs power, and we work from photographs, drawings or the make and model of the vehicle when that is enough to price graphics accurately. The Swansea postcode districts we quote for include SA1, SA5 and SA2.

Other towns near Swansea

Start with a free quote: a handful of photos plus approximate widths and heights is enough for halo-lit letters in Swansea. You check and approve the proof, and only then is anything made.

More signs in Swansea

All sign types in Swansea · Halo-lit letters across West Glamorgan

Typical lead time	typically 4–6 weeks after proof approval, plus consent
Typical size	Letters 300–600 mm tall, stood 25–50 mm off the wall
Fixing / installation	Locators into the wall; one cable hole per letter