Why does our old lightbox flicker?

In an older box it's usually failing fluorescent tubes, starters or ballasts, and replacing them one at a time rarely lasts. Patchy light can also mean water has got in. Converting the box to LED fixes the cause, if the frame is sound.

Can the existing wiring be reused?

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

Is there a typical lead time for lightbox signs in Renfrew?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

What makes lightbox signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Renfrew is £1,250–£4,800 per lightbox + VAT, confirmed after a survey or artwork check.

Lightbox or lit letters?

A lightbox suits a logo, colours or extra information on one lit panel at lower cost. Individually lit letters give a cleaner, brand-led look with the fascia showing between them. Your street, budget and any conservation-area rules usually decide it.

Who carries out the work on lightbox signs in Renfrew?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Lightbox signs in Renfrew

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

What you gain from lightbox signs in Renfrew

Businesses with several sites across Renfrewshire and Inverclyde can share one set of artwork, so the Renfrew branch matches the rest.
If a Renfrew convenience store or pharmacy has a sound box frame, a new face refreshes the frontage for less.
Taking over a franchise or a new lease in Renfrew? A replacement face keeps the existing box and wiring.

What lightbox signs cost in Renfrew

How much? Expect a guide range of £1,250–£4,800 per lightbox, VAT excluded. The rows below show what moves a job up or down that range, and the figure becomes firm once the survey or artwork check is done.

Lightbox signs in Renfrew: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lightbox up to 3 m, printed face	£1,250 – £2,650	£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters	£2,450 – £4,800	£2,940 – £5,760
Replacement face for an existing lightbox	£295 – £950	£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Renfrew project

Shaped lightbox

Made to a logo or roundel outline instead of a rectangle.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Printed flex face

Joint-free over long spans and simple to re-print later.

Consent for illuminated signs in Renfrew

Exterior illuminated signs in Scotland usually need express advertisement consent from the council under the Town and Country Planning (Control of Advertisements) (Scotland) Regulations 1984, as amended. Applications are normally made through eDevelopment.scot, and the council can confirm its timescales and any conditions on hours or brightness. Brightness is commonly judged against the ILP's PLG05 guidance, and static lighting is expected. If the building is listed, listed building consent is usually needed as well. An electrician makes the final mains connection to BS 7671 and you receive the certificate. We prepare drawings and photos for the application, or submit it for you.

Covering Renfrew and Renfrewshire and Inverclyde

Wherever you are in Renfrewshire and Inverclyde, Renfrew included, the service is identical. We arrange a survey when the sign is fixed to a building or needs power, and we work from photographs, drawings or the make and model of the vehicle when that is enough to price graphics accurately. The Renfrew postcode districts we quote for include PA4, G14, PA1 and G13. Roughly 3.2 miles separate Renfrew from Paisley, which lies to the south-west.

Also within reach of Renfrew

Start with a free quote: a handful of photos plus approximate widths and heights is enough for lightbox signs in Renfrew. You check and approve the proof, and only then is anything made.

More signs in Renfrew

All sign types in Renfrew · Lightbox signs across Renfrewshire and Inverclyde

Typical lead time	typically 2–4 weeks after proof approval, plus consent
Typical lifespan	LEDs often manufacturer-rated around 50,000 hours; prints fade sooner
Fixing / installation	Brackets or rails on a sound fascia; stainless fixings