How long does a printed face last?

Several years in most positions, though colours fade noticeably faster on a sunny south-facing frontage. Laminates and UV-resistant inks help slow fading, and reds and yellows usually go first. A box that's easy to re-face keeps future rebrands and refreshes affordable.

Who carries out the work on lightbox signs in Paisley?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can the existing wiring be reused?

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

Could the consent process affect the timing of my job in Paisley?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

How much should I budget for lightbox signs in Paisley?

As a guide, £1,250–£4,800 per lightbox + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Do lightboxes let in water and insects?

A well-made box is sealed around the face, with small drainage holes along the bottom so condensation can escape. LEDs run much cooler than tubes, so less heat draws insects in. Taking the face off occasionally to clean inside keeps the light even.

Lightbox signs in Paisley

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

Good reasons to look at lightbox signs in Paisley

Where a Paisley shop has a long fascia, a flex-faced box spans it without the joins rigid acrylic sheets need.
When an old fluorescent box above a Paisley shop flickers, an LED conversion can cost far less than a new sign.
Late-opening barbers and cafés in Paisley can use routed faces so only the name glows, for a cleaner look.

What lightbox signs cost in Paisley

Here is the price picture for lightbox signs in Paisley: a guide of £1,250 to £4,800 per lightbox, with VAT on top. The rows below give more detail. A survey or artwork check comes first, and then we confirm the price in writing.

Lightbox signs in Paisley: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lightbox up to 3 m, printed face	£1,250 – £2,650	£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters	£2,450 – £4,800	£2,940 – £5,760
Replacement face for an existing lightbox	£295 – £950	£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Paisley project

Routed push-through face

Only the lettering glows, standing slightly proud of the face.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Replacement face

A new face cut to fit a sound existing box.

Consent for illuminated signs in Paisley

Illumination brings Scottish signs firmly into the consent process. Under the 1984 Scotland Regulations, internally lit or halo-lit fascia and projecting signs usually need express consent; the council decides, and listed buildings or conservation areas add an extra layer, with listed building consent usually required on a listed building. Keep the light static and the luminance within the PLG05 guidance the council is likely to reference. LED modules and drivers run at low voltage, while the final connection is made to BS 7671 by an electrician. We confirm the route before you commit and can handle the drawings or the eDevelopment.scot submission.

Covering Paisley and Renfrewshire and Inverclyde

We cover Paisley and every other part of Renfrewshire and Inverclyde as part of a UK-wide service. Where a survey is needed, we arrange a visit to measure and photograph the site; for many graphics and vehicle jobs, clear photos and measurements are enough to quote from. Around Paisley, that covers postcode districts such as PA2, PA1, PA3 and G78.

Also within reach of Paisley

Ask for a free quote on lightbox signs in Paisley today. A couple of snapshots and rough dimensions help us price accurately, and you sign off the proof before we order or make anything.

More signs in Paisley

All sign types in Paisley · Lightbox signs across Renfrewshire and Inverclyde

Consent	Express consent usually needed for a lit fascia box
Fixing / installation	Brackets or rails on a sound fascia; stainless fixings
Typical lead time	typically 2–4 weeks after proof approval, plus consent