Lightbox signs in Hertford

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Yes, if there's sound masonry to fix to. The box sits on brackets or rails anchored into the wall, with a cable entry drilled behind it. Render, timber boarding or old cladding may need checking or reinforcing first, which the survey covers.

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Hertford is £1,250–£4,800 per lightbox + VAT, confirmed after a survey or artwork check.

In an older box it's usually failing fluorescent tubes, starters or ballasts, and replacing them one at a time rarely lasts. Patchy light can also mean water has got in. Converting the box to LED fixes the cause, if the frame is sound.