Can the existing wiring be reused?

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

Will the location in Borehamwood affect the cost of lightbox signs?

Location is one factor among several, alongside size, material, access equipment and design time. Our guide range is £1,250–£4,800 per lightbox + VAT; any travel, parking or access costs for your site in Borehamwood are included in the written quote we confirm after a survey or artwork check, so you can see them before you commit.

Is there a typical lead time for lightbox signs in Borehamwood?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Will someone visit my premises in Borehamwood before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Why does our old lightbox flicker?

In an older box it's usually failing fluorescent tubes, starters or ballasts, and replacing them one at a time rarely lasts. Patchy light can also mean water has got in. Converting the box to LED fixes the cause, if the frame is sound.

Do lightboxes let in water and insects?

A well-made box is sealed around the face, with small drainage holes along the bottom so condensation can escape. LEDs run much cooler than tubes, so less heat draws insects in. Taking the face off occasionally to clean inside keeps the light even.

Lightbox signs in Borehamwood

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

Points in favour of lightbox signs in Borehamwood

Where a Borehamwood shop has a long fascia, a flex-faced box spans it without the joins rigid acrylic sheets need.
Businesses with several sites across Hertfordshire can share one set of artwork, so the Borehamwood branch matches the rest.
A Borehamwood takeaway trading mostly after dark keeps its name and number readable with a fully lit face.

What lightbox signs cost in Borehamwood

Guide prices start from £1,250 and go up to £4,800 per lightbox, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Lightbox signs in Borehamwood: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lightbox up to 3 m, printed face	£1,250 – £2,650	£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters	£2,450 – £4,800	£2,940 – £5,760
Replacement face for an existing lightbox	£295 – £950	£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Borehamwood project

Routed push-through face

Only the lettering glows, standing slightly proud of the face.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Printed flex face

Joint-free over long spans and simple to re-print later.

Consent for illuminated signs in Borehamwood

Plan for express consent. In England most internally illuminated and halo-lit signs on a fascia or projecting bracket need it, and deemed consent does not cover illuminated signs in conservation areas, National Parks, National Landscapes, the Broads or areas of special control. The council usually decides within 8 weeks, and consent normally lasts 5 years. Expect questions about brightness: many councils refer to ILP guidance PLG05, which sets maximum luminance by zone, and they expect steady light rather than flashing. We prepare scaled drawings and photo mock-ups for the application, or submit it for you, and an electrician completes the connection to BS 7671 and gives you the certificate.

Covering Borehamwood and Hertfordshire

You do not need to be in a particular postcode for us to help: Borehamwood and the whole of Hertfordshire are covered. If your job needs a survey, we arrange the visit. If it can be priced from photos, sizes and the vehicle make and model, we do it that way instead. In postcode terms, Borehamwood jobs typically fall in WD6, WD7 and HA8. Roughly 5.1 miles separate Borehamwood from Watford, which lies to the west.

Close to Borehamwood

Start with a free quote: a handful of photos plus approximate widths and heights is enough for lightbox signs in Borehamwood. You check and approve the proof, and only then is anything made.

More signs in Borehamwood

All sign types in Borehamwood · Lightbox signs across Hertfordshire

Typical size	Up to about 5 m long; often 100–150 mm deep
Consent	Express consent usually needed for a lit fascia box
Typical lead time	typically 2–4 weeks after proof approval, plus consent