Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

How long does it all take?

Making and fitting typically takes 3–5 weeks after you approve the proof. Allow for advertisement consent first, usually up to 8 weeks for a decision, plus any highway licence, which runs on the authority's own timetable. Applications can be prepared in parallel.

What do you need from me to quote for illuminated projecting signs in Birmingham?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

When could work on illuminated projecting signs go ahead in Birmingham?

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

What makes illuminated projecting signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Birmingham is £695–£2,250 per sign + VAT, confirmed after a survey or artwork check.

Illuminated projecting signs in the West Midlands

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in the West Midlands?

Before you commit to a lit design in a historic part of Birmingham, we check the council's approach to projecting signs.
Chains across the West Midlands can use one lit roundel design, so a Birmingham site is recognised from the street's end.
Upper-floor clinics, dentists and studios in Birmingham can mark an easily missed street door with a lit projecting sign.

Guide prices in the West Midlands

We publish guide prices so you can plan before you get in touch. For illuminated projecting signs the range is £695–£2,250 per sign, not including VAT, and the final price is confirmed after we survey the site or check the artwork.

Illuminated projecting signs in the West Midlands: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in the West Midlands

Illuminated signs are treated more strictly than unlit ones in England. Deemed consent for illumination is limited, and it does not apply at all in conservation areas, National Parks, National Landscapes, the Broads or areas of special control, so most internally lit or halo-lit fascia and projecting signs need express consent from the council. Decisions usually take up to 8 weeks and consent is normally granted for 5 years. Councils commonly assess brightness against the Institution of Lighting Professionals' guidance PLG05, and lighting should be static. An electrician makes the final mains connection to BS 7671. We can prepare the drawings and photos for your application, or submit it for you.

Options worth considering

Routed push-through

Painted metal faces where only lettering and logo glow.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Towns in the West Midlands

Your town not here? We still cover it. These are the main towns in the West Midlands with their own page for illuminated projecting signs, each one setting out the same survey, proof and fitting steps.

Ready when you are. Request a free quote for illuminated projecting signs in the West Midlands and attach whatever you have: snapshots, dimensions, a logo file. We send a scaled drawing, and nothing goes ahead without your sign-off.