Do I need to be there when the sign is fitted?

Not usually, as long as the frontage is accessible and power to any old sign lighting can be isolated. We agree the date with you, cone off and manage the pavement area while working, fit around your opening hours where access allows, and send photos once it is up.

Do you work across County Tyrone or only in Strabane?

Across all of County Tyrone, and the rest of the UK too. Strabane is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Can I get a fixed price for fascia signs in Strabane before committing?

Yes. We start from the guide range, £495 to £1,650 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

How long does a fascia sign take?

A flat fascia is typically made and fitted 2–3 weeks after you approve the proof, and fitting a single-storey frontage typically takes a few hours. If listed building or express advertisement consent is needed, the council decision comes first; express consent decisions usually take up to 8 weeks.

How long does it take to get fascia signs in Strabane?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

Fascia signs in Strabane

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Good reasons to look at fascia signs in Strabane

Rebranding a Strabane business is simpler with a flat panel, because vinyl lettering can be updated without replacing the whole sign.
Where footfall on a Strabane high street is heavy, a clean, high-contrast fascia is often read before passers-by notice the window display.
On a narrow street in Strabane, people read signs at an angle, so clear letterforms matter more than sheer size.

What fascia signs cost in Strabane

The figures in this table are guide prices, from £495 to £1,650 per sign, and they exclude VAT. They are there to help you plan. A firm price follows the survey or artwork check and is agreed before any work starts.

Fascia signs in Strabane: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Removing and disposing of an old sign is guided at £95 to £250, and a scaffold tower or access platform, if needed, at £150 to £450 per day, both excluding VAT. Repairs to the board are priced only if the survey shows they are needed, and every figure is confirmed after survey and an artwork check.

Options for your Strabane project

Panel with edge trim

An aluminium trim frames the panel and hides the fixings.

Panel with trough lighting

A flat panel lit by LED trough lights or spotlights after dark.

Cut-vinyl lettering

Solid-colour vinyl letters on a coloured panel, easy to update later.

Do you need permission for a sign in Strabane?

Before any exterior sign goes up in Northern Ireland, it is worth checking the 2015 NI Advertisement Regulations. Some straightforward signs on business premises fall within what is allowed without applying, but the conditions are Northern Ireland's own and conservation areas need more care. Listed buildings usually need listed building consent as well, and works without it can be a criminal offence. We confirm the position with you before you commit to fascia signs, and we can prepare the drawings and photographs for an NI Planning Portal application or submit it for you.

Covering Strabane and County Tyrone

We cover Strabane and every other part of County Tyrone as part of a UK-wide service. Where a survey is needed, we arrange a visit to measure and photograph the site; for many graphics and vehicle jobs, clear photos and measurements are enough to quote from. Roughly 17 miles separate Strabane from Omagh, which lies to the south-east.

Neighbouring towns

Fascia signs in Derry/Londonderry 14 mi
Fascia signs in Omagh 17 mi

Get in touch about fascia signs for your business in Strabane. Share photos, measurements and any artwork you already have; we will send a free quote and a proof to check, and nothing is made until you say yes.

More signs in Strabane

All sign types in Strabane · Fascia signs across County Tyrone

Typical lead time	typically made and fitted 2–3 weeks after you approve the proof
Typical lifespan	Panel lasts many years; vinyl faces typically need renewing first
Typical size	Up to about 5 m long; height set by the existing fascia board