Does my landlord need to approve the sign?

Check your lease first. Many parades, retail parks and managed estates set rules on sign size, colour, materials and lighting, and some want drawings approved in writing. We can supply a scale drawing and a visual of the sign on your frontage for them.

Can a sign go above a roller shutter box?

Yes. Shutter boxes often sit just under or across the fascia, so we measure around them at survey. The panel can sit above the box, or cover it with a removable section so the shutter can still be serviced. Tell us if the motor needs access.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

What can delay fascia signs in Omagh?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Why is there a price range for fascia signs rather than one figure?

Because jobs vary. The guide of £495 to £1,650 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Omagh.

Do you cover smaller places near Omagh as well?

Yes. Our coverage is not limited to Omagh itself: nearby towns, industrial estates and business parks across County Tyrone are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Fascia signs in County Tyrone

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in County Tyrone?

For an Omagh unit in a conservation area, a matt panel with restrained lettering is often the easier design to agree.
Takeaways and cafés in Omagh trading into the evening can pair a flat fascia with LED trough lighting instead of a lightbox.
Taking over an older unit in Omagh? A new panel can usually go straight over the existing fascia board, without stripping it out.

Guide prices in County Tyrone

Guide prices start from £495 and go up to £1,650 per sign, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Fascia signs in County Tyrone: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Do you need permission for a sign in County Tyrone?

Signs in Northern Ireland are covered by the 2015 Control of Advertisements Regulations (NI), not the English or Scottish versions. Whether an unlit sign needs an application depends on its size, where it sits on the building and whether the building is listed or in a conservation area. Where consent is needed, the council handles it, with applications made online via the NI Planning Portal. For listed buildings, listed building consent usually applies too, and fixings into mortar joints are generally preferred. We check what applies to your premises before anything is ordered, and we can prepare or submit the application for you.

Options worth considering

Mineral-core panel

Specified where a landlord or building control asks for one.

Re-skin of an old sign

A new face fixed over a sound existing sign frame.

Cut-vinyl lettering

Solid-colour vinyl letters on a coloured panel, easy to update later.

Towns in County Tyrone

Find your town in the list to open its page for fascia signs. If it is not listed, ask anyway: our coverage is UK-wide, not limited to these places in County Tyrone.

Tell us where you are in County Tyrone and what you need. We quote for fascia signs free of charge, and the design proof always comes before any making or fitting.