Why is there a price range for built-up 3D letters rather than one figure?

Because jobs vary. The guide of £55 to £165 per letter + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Hereford.

Will someone visit my premises in Hereford before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Why use a paper template for fixing?

The template is a full-size layout of every letter with its fixing holes marked. Taped to the wall, it shows the exact position and spacing before anyone drills, lets you see the scale on the real building, and makes sure each stud lines up with its hole.

Can non-lit built-up letters be lit later?

Not easily. Illuminated letters need translucent faces or open backs, internal LED modules, drain holes and cable routes designed in from the start. If lighting is a possibility, we can quote halo-lit or face-lit letters now, or plan spotlights for a non-lit set.

How long does it take to get built-up 3D letters in Hereford?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Do stainless steel letters rust?

Stainless steel resists rust well, but it is not immune. Grade 304 suits most inland sites; near the coast, grade 316 is specified because salt air can cause brown tea staining on 304. Occasional washing with clean water keeps either grade bright.

Built-up 3D letters in Herefordshire

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Why choose built-up 3D letters in Herefordshire?

Letters for Hereford frontages are usually 304 stainless; where a building faces the sea or a gritted main road, 316 keeps its finish for longer.
Hotels and venues in Hereford wanting a lasting first impression may choose brass-finish letters, which suit traditional and modern buildings.
Refurbishing a frontage in Hereford? Plan letter positions with the architect's drawings so fresh render isn't drilled twice.

Guide prices in Herefordshire

The table shows guide prices for built-up 3D letters, starting from £55 and reaching about £165 per letter. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

Built-up 3D letters in Herefordshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

The metal drives cost first: painted aluminium sits at the lower end, mirror stainless and brass finishes at the top. Letter height, return depth, letter count, stand-off locators, access height and the wall surface follow. Every price is confirmed after survey and an artwork check.

Do you need permission for a sign in Herefordshire?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Options worth considering

Contrast returns

Faces in one finish and sides in another, such as brushed with black.

Brushed 304 stainless

Satin-grain stainless for most inland locations, classic and understated.

Brass or copper finish

Warm metallic faces, lacquered or left to patina.

Towns in Herefordshire

Main towns in Herefordshire where we design, make and fit signage, including built-up 3D letters. Select yours, or simply get in touch if your town or village is missing from the list.

Get a free price for built-up 3D letters in Herefordshire. Use the quote form, phone or WhatsApp, include a few pictures and measurements, and we will send a written quote followed by a design for your approval.