Can I get a fixed price for built-up 3D letters in Truro before committing?

Yes. We start from the guide range, £55 to £165 per letter excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

How soon after I approve the proof can the work on built-up 3D letters happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Truro once materials are ordered.

How do I keep metal letters clean?

Wash them a few times a year with warm water and a mild detergent, then rinse and dry, wiping brushed stainless along the grain. Avoid abrasive pads and bleach-based cleaners, which scratch or mark finishes. Mirror stainless and brass show marks fastest, so they suit positions out of reach.

Do stainless steel letters rust?

Stainless steel resists rust well, but it is not immune. Grade 304 suits most inland sites; near the coast, grade 316 is specified because salt air can cause brown tea staining on 304. Occasional washing with clean water keeps either grade bright.

Who carries out the work on built-up 3D letters in Truro?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can you make my logo in 3D?

Usually, yes. Solid logo shapes are fabricated to the same depth as the letters so the sign reads as one set. Fine lines, gradients and small text are better applied to the fabricated face in vinyl or print, and the proof shows the proposed treatment before fabrication.

Built-up 3D letters in Cornwall

Built-up letters are three-dimensional letters fabricated, usually from metal sheet, with a face and returns joined into a hollow letter typically 50–100 mm deep, then fixed to a wall or sign on locators.

Why choose built-up 3D letters in Cornwall?

Gyms, studios and trade units in Truro can use painted aluminium letters on profiled cladding for a durable name above the roller door.
Business park tenants in Truro who mount letters on a shared entrance canopy should check the landlord's signage rules first.
A Truro restaurant with a handsome stone or brick front can skip a fascia panel and let fabricated letters sit directly on the masonry.

Guide prices in Cornwall

Use these figures to budget: £55 to £165 per letter is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Built-up 3D letters in Cornwall: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Fabricated letter, 300 mm tall	£55 – £165	£66 – £198
Typical business name (10–14 letters)	£850 – £2,600	£1,020 – £3,120
Logo or symbol, made to the same depth	£150 – £650	£180 – £780

Non-illuminated letters around 300 mm tall are guided at £55 to £165 per letter, supplied and fitted, excluding VAT. A typical business name of 10–14 letters is guided at £850 to £2,600, and a logo or symbol made to the same depth adds a guide £150 to £650.

Do you need permission for a sign in Cornwall?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Options worth considering

Painted aluminium

Lightweight letters painted or powder coated to any RAL colour.

Contrast returns

Faces in one finish and sides in another, such as brushed with black.

Mirror-polished stainless

Reflective faces that catch light, but show fingerprints.

Towns in Cornwall

Your town not here? We still cover it. These are the main towns in Cornwall with their own page for built-up 3D letters, each one setting out the same survey, proof and fitting steps.

Parts of Cornwall involve longer journeys, so surveys and fitting are arranged case by case and travel is itemised on your quote.

Anywhere in Cornwall, the first step is the same: send photos and rough sizes for a free quote on built-up 3D letters. You approve a proof to scale before anything is made.