How long does it take to get fascia signs in Truro?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

Who carries out the work on fascia signs in Truro?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can I get a fixed price for fascia signs in Truro before committing?

Yes. We start from the guide range, £495 to £1,650 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Can a sign go above a roller shutter box?

Yes. Shutter boxes often sit just under or across the fascia, so we measure around them at survey. The panel can sit above the box, or cover it with a removable section so the shutter can still be serviced. Tell us if the motor needs access.

Will a fascia sign cope with bad weather?

It should, if it is fixed properly. Aluminium composite does not rot or swell, and stainless fixings avoid the rust streaks that ordinary screws can leave. On older frontages the weak point is usually the board behind, so we check the top edge for water getting in and seal it.

How long does a fascia sign take?

A flat fascia is typically made and fitted 2–3 weeks after you approve the proof, and fitting a single-storey frontage typically takes a few hours. If listed building or express advertisement consent is needed, the council decision comes first; express consent decisions usually take up to 8 weeks.

Fascia signs in Cornwall

A fascia sign is the flat panel fixed along the board above a shop or office frontage, usually 3–4 mm aluminium composite carrying printed or cut-vinyl lettering, a logo and sometimes contact details.

Why choose fascia signs in Cornwall?

Taking over an older unit in Truro? A new panel can usually go straight over the existing fascia board, without stripping it out.
On a narrow street in Truro, people read signs at an angle, so clear letterforms matter more than sheer size.
Takeaways and cafés in Truro trading into the evening can pair a flat fascia with LED trough lighting instead of a lightbox.

Guide prices in Cornwall

Prices below are guides, not quotes: £495 to £1,650 per sign plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Fascia signs in Cornwall: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Aluminium composite fascia, up to 3 m	£495 – £950	£594 – £1,140
Aluminium composite fascia, 3–5 m	£750 – £1,650	£900 – £1,980
Remove and dispose of an old sign	£95 – £250	£114 – £300
Scaffold tower or access platform, per day (if needed)	£150 – £450	£180 – £540

Guide prices, supplied and fitted and excluding VAT, are £495 to £950 for an aluminium composite fascia up to 3 m and £750 to £1,650 for 3–5 m. Full-colour prints and colour-matched trims sit toward the top of each range.

Do you need permission for a sign in Cornwall?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Options worth considering

Printed panel

Full-colour laminated print on aluminium composite, for logos, photos and gradients.

Cut-vinyl lettering

Solid-colour vinyl letters on a coloured panel, easy to update later.

Re-skin of an old sign

A new face fixed over a sound existing sign frame.

Towns in Cornwall

Main towns in Cornwall where we design, make and fit signage, including fascia signs. Select yours, or simply get in touch if your town or village is missing from the list.

Parts of Cornwall involve longer journeys, so surveys and fitting are arranged case by case and travel is itemised on your quote.

Photos of the building, window or vehicle, plus approximate sizes, are enough for us to quote fascia signs anywhere in Cornwall. There is no charge for the quote and no commitment until you approve the proof.