Vehicle wrap and graphics removal in Morden

Often, yes. Cut lettering applied on top of a wrap can usually be warmed and peeled off without lifting the wrap, as long as both are in sound condition. The wrap under the lettering will have been shaded from the sun, so a faint outline may show; new lettering placed in the same spot usually hides it.

Usually, if there's a dry, covered space with room to work around the vehicle and power for the heat gun. Removal in cold, damp conditions is slower because the film and adhesive stay stiff. For a fleet, doing several vehicles in one visit at your site is often the simplest approach.

Yes. We start from the guide range, £245 to £795 per vehicle excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

You'll get clean panels with the adhesive removed, showing the paint as it was under the film. Chips, scratches or dents that the graphics were hiding will be visible again, and some ghosting may show where the film's edges were. A valet or machine polish is usually the finishing step before a sale, lease return or re-wrap.