Vehicle wrap and graphics removal in Cricklewood

You'll get clean panels with the adhesive removed, showing the paint as it was under the film. Chips, scratches or dents that the graphics were hiding will be visible again, and some ghosting may show where the film's edges were. A valet or machine polish is usually the finishing step before a sale, lease return or re-wrap.

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Usually, if there's a dry, covered space with room to work around the vehicle and power for the heat gun. Removal in cold, damp conditions is slower because the film and adhesive stay stiff. For a fleet, doing several vehicles in one visit at your site is often the simplest approach.

Yes. We start from the guide range, £245 to £795 per vehicle excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

A full wrap typically takes about a day per van, and lettering or part graphics typically take a few hours. Sun-damaged or calendered film that breaks into small pieces can take considerably longer, as can heavy adhesive residue. We'll give you a typical time once we've seen photos of the film's condition.