What if your phone number or services change?

The affected area can usually be patched with a new printed section cut to fit the existing design, rather than redoing the whole van. On an older wrap, new print may look slightly brighter than film that has been in the sun for a while, so replacing a larger panel, such as a whole rear door, can blend in better.

How long does it take to get van wraps in Burntwood?

It typically takes a few weeks from first enquiry, with much of that time falling after you approve the proof, while the work is made and scheduled. Graphics and vehicle jobs are typically shorter than fabricated or illuminated signs. If advertisement consent is needed, the council's decision comes first and adds to the overall timescale.

What do you need from me to quote for van wraps in Burntwood?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Do you need print-ready artwork for a van wrap?

No. A logo file, your brand colours and the wording you want are enough to start. The design is laid out on a scale template of your van, with each side, the front and the rear doors shown on the proof. If you already have a full wrap design, we check it against the template so nothing lands on a handle or door gap.

Can I get a fixed price for van wraps in Burntwood before committing?

Yes. We start from the guide range, £795 to £3,850 per van excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Can a wrap go over the existing lettering?

It's better not to. Old lettering leaves raised edges that show through new film, and the new wrap would only be as secure as the old vinyl underneath. Taking the lettering off first, cleaning away the adhesive and checking for ghosting gives the wrap a smooth base. Removal is quoted as part of the job when it's needed.

Van wraps in Burntwood

A van wrap is printed cast vinyl film, protected by a clear laminate, applied over a van's factory paint to cover some or all of its panels with your branding, colours and contact details.

What van wraps can do for businesses in Burntwood

Wherever you park in Burntwood, whether a trade counter, a supermarket car park or a client's drive, the wrap keeps working while you do.
Planning to sell or hand back the van later? Keeping the paint covered while you work around Burntwood can help it go back in better condition.
If you trade across Staffordshire as well as Burntwood, a wrapped van takes the same branding to every job without paying for advertising space.

What van wraps cost in Burntwood

Pricing for van wraps is worked out job by job, but the guide range is £795 to £3,850 per van + VAT. The table lists typical options. Your figure is confirmed only after a site survey or a check of the artwork you send.

Van wraps in Burntwood: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Part wrap (sides and rear)	£795 – £1,850	£954 – £2,220
Full wrap, small or medium van	£1,950 – £2,950	£2,340 – £3,540
Full wrap, long-wheelbase or high-roof van	£2,450 – £3,850	£2,940 – £4,620

Guide prices start from £795 + VAT for a part wrap covering the sides and rear, typically up to £1,850 + VAT depending on van size and coverage. A full wrap is typically between £1,950 and £2,950 + VAT on a small or medium van, and £2,450 to £3,850 + VAT on a long-wheelbase or high-roof van.

Options for your Burntwood project

Full wrap

Almost every painted exterior panel covered, for a new colour or an end-to-end design.

Colour change plus graphics

Plain coloured film over the whole van, with printed or cut graphics on top.

Part wrap

Sides and rear printed over your factory paint, which does part of the design work.

Rules for vehicle graphics in Burntwood

For vehicles, the paperwork is about DVLA and your insurer, not the planning department. Graphics on a van or car that is normally driven around fall outside advertisement control; only a vehicle parked mainly as an advertising hoarding is caught. A change of main colour means updating the colour on your V5C and telling your insurer. We leave the windscreen and front side windows clear, because the Construction and Use Regulations 1986 require at least 75% and 70% light through them, and we check the paint is sound factory finish before wrapping. If the vehicle is leased, confirm the lease permits graphics and how they must come off.

Covering Burntwood and Staffordshire

Smart Signs works throughout Staffordshire, Burntwood included, and across the rest of the country. A survey visit is arranged for fitted and illuminated signs so nothing is guessed. Window, wall and vehicle graphics can usually be priced remotely from good photos and accurate measurements. Addresses in WS7 and WS8 are all within our Burntwood coverage. Burntwood lies around 25 miles south-east of Stoke-on-Trent.

Also within reach of Burntwood

Tell us what you have in mind for van wraps in Burntwood. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.

More signs in Burntwood

All sign types in Burntwood · Van wraps across Staffordshire

Materials	Printed cast vinyl with clear gloss, satin or matt laminate
Fixing / installation	Applied under cover over clean, sound factory paint, with edges worked into recesses
Typical size	Small panel vans to long-wheelbase high-roof vans; part or full coverage