Do you need print-ready artwork for a van wrap?

No. A logo file, your brand colours and the wording you want are enough to start. The design is laid out on a scale template of your van, with each side, the front and the rear doors shown on the proof. If you already have a full wrap design, we check it against the template so nothing lands on a handle or door gap.

Will someone visit my premises in Bo’ness before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

When could work on van wraps go ahead in Bo’ness?

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

What makes van wraps more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Bo’ness is £795–£3,850 per van + VAT, confirmed after a survey or artwork check.

What if your phone number or services change?

The affected area can usually be patched with a new printed section cut to fit the existing design, rather than redoing the whole van. On an older wrap, new print may look slightly brighter than film that has been in the sun for a while, so replacing a larger panel, such as a whole rear door, can blend in better.

Can a wrap go over dents, rust or a respray?

A wrap follows the surface it's on, so dents and deep scratches still show through, and rust keeps spreading underneath. Poor resprays and failing lacquer are the bigger risk, because they can lift when the wrap is removed later. We check the paint before quoting and suggest any repairs that should happen first.

Van wraps in Bo’ness

A van wrap is printed cast vinyl film, protected by a clear laminate, applied over a van's factory paint to cover some or all of its panels with your branding, colours and contact details.

What van wraps can do for businesses in Bo’ness

Queues on the main roads in and out of Bo’ness give the driver behind you time to read a phone number on your rear doors.
Every day your van spends parked outside a customer's house in Bo’ness is a day the neighbours see your name, services and number at eye level.
A firm just starting out in Bo’ness can look properly set up from the first job with a wrap rather than a magnetic sign on the door.

What van wraps cost in Bo’ness

Below is the guide pricing we use for van wraps: from £795 up to £3,850 per van, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Van wraps in Bo’ness: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Part wrap (sides and rear)	£795 – £1,850	£954 – £2,220
Full wrap, small or medium van	£1,950 – £2,950	£2,340 – £3,540
Full wrap, long-wheelbase or high-roof van	£2,450 – £3,850	£2,940 – £4,620

The main drivers are van size, how much is covered, how complex the panels are, design time and whether old graphics have to come off first. Ribbed sides and deep recesses take longer to fit. All prices exclude VAT and are confirmed after we've checked your van details and artwork.

Options for your Bo’ness project

Part wrap

Sides and rear printed over your factory paint, which does part of the design work.

Colour change plus graphics

Plain coloured film over the whole van, with printed or cut graphics on top.

Reflective details

Retroreflective film for stripes or lettering that shows up in headlights.

Rules for vehicle graphics in Bo’ness

Three practical rules shape vehicle graphics in Scotland. One: change the main colour and the V5C needs updating with DVLA, with your insurer told too. Two: the windscreen must pass at least 75% of light and the front side windows at least 70%, so graphics are kept off them; rear-window one-way vision is used on vans and cars with two exterior mirrors. Three: on a leased vehicle, check the lease allows graphics and how they must be removed. Advertisement consent does not usually come into it, because vehicles normally used as moving vehicles are outside advertisement control, unlike one parked as a billboard.

Covering Bo’ness and Forth Valley

Our service reaches Bo’ness and all of Forth Valley. The first step depends on the job: a site visit for signs that need measuring, fixing or wiring, or a photo-based quote for graphics and lettering where pictures and sizes tell us enough. Addresses in EH51 and EH49 are all within our Bo’ness coverage. Bo’ness is about 14 miles south-east of Stirling.

Also within reach of Bo’ness

Photos, sizes and your logo are all we need to start. Send them over for a free, no-obligation quote on van wraps in Bo’ness; you approve a scaled drawing before a single thing is made.

More signs in Bo’ness

All sign types in Bo’ness · Van wraps across Forth Valley

Typical lifespan	Manufacturers commonly rate cast wrap film around 5–7 years on vertical panels; roofs age faster
Typical size	Small panel vans to long-wheelbase high-roof vans; part or full coverage
Typical lead time	typically 1–3 weeks from approved proof; fitting typically 1–3 days per van