Do you work across Wiltshire or only in Swindon?

Across all of Wiltshire, and the rest of the UK too. Swindon is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

What makes tray signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Swindon is £1,250–£3,450 per sign + VAT, confirmed after a survey or artwork check.

Can a tray sign cover an old fascia completely?

Yes, in most cases. A tray can be sized to the full fascia board with folded ends that wrap the corners, hiding the old timber. We still check the board is sound and fix through to solid structure, because hidden rot can loosen fixings over time.

Is there a typical lead time for tray signs in Swindon?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

Tray signs in Wiltshire

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Why choose tray signs in Wiltshire?

Professional practices in Swindon, such as dentists, opticians and solicitors, may prefer a tray because a clean folded edge suggests care.
If your Swindon premises might open into the evening one day, a light-ready tray avoids paying for a second sign later.
Shoppers walking along a Swindon pavement see a sign side-on first, and tray returns give it a solid edge from exactly that angle.

Guide prices in Wiltshire

The table shows guide prices for tray signs, starting from £1,250 and reaching about £3,450 per sign. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

Tray signs in Wiltshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Do you need permission for a sign in Wiltshire?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Options worth considering

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Towns in Wiltshire

Looking for a specific town? Every place listed here falls within our coverage of Wiltshire for tray signs; open one to see the details for that town.

Get a free price for tray signs in Wiltshire. Use the quote form, phone or WhatsApp, include a few pictures and measurements, and we will send a written quote followed by a design for your approval.