Do tray signs suit office buildings and business parks?

Yes. Trays suit entrances, canopies and plain cladding as well as shop fascias, and can be fixed to brick, render or cladding rails. For cladding we confirm the fixing method with the building owner first, since drilling some panel systems can affect how they perform.

Can I get a fixed price for tray signs in Perth before committing?

Yes. We start from the guide range, £1,250 to £3,450 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

How soon after I approve the proof can the work on tray signs happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Perth once materials are ordered.

Do you cover smaller places near Perth as well?

Yes. Our coverage is not limited to Perth itself: nearby towns, industrial estates and business parks across Perth and Kinross are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Can I change the lettering later?

That depends on the lettering method. Vinyl can be removed and replaced on site. Raised acrylic letters can be unscrewed and swapped, leaving holes to fill. Routed letters are cut into the face, so a change normally means a new tray face, which is worth knowing before you choose.

Tray signs in Perth | Smart Signs

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Tray signs in Perth: the practical benefits

Professional practices in Perth, such as dentists, opticians and solicitors, may prefer a tray because a clean folded edge suggests care.
Clinics and salons in Perth wanting a calm, premium look can get it from raised acrylic letters on a matt tray, unlit.
An estate agent in Perth may change window displays weekly but keep the fascia for years, which is where a durable powder coat pays back.

What tray signs cost in Perth

We publish guide prices so you can plan before you get in touch. For tray signs the range is £1,250–£3,450 per sign, not including VAT, and the final price is confirmed after we survey the site or check the artwork.

Tray signs in Perth: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Options for your Perth project

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Wrap-around tray

Sized to the whole fascia with folded ends, hiding the old board.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Do you need permission for a sign in Perth?

Scotland runs its own advertisement rules, set out in the 1984 Control of Advertisements (Scotland) Regulations as amended. An unlit sign on your own premises may not need an application, but that depends on its size, its position and whether the building is listed or sits in a conservation area. If consent is needed, the council receives the application, typically submitted online through eDevelopment.scot. On a listed building, listed building consent usually applies too, and fixings into mortar joints are generally preferred. We check the position with you before anything is ordered, and we can draw up and submit the paperwork if you would like us to.

Covering Perth and Perth and Kinross

From the middle of Perth to the edges of Perth and Kinross, the same survey, proof and fit process applies. If the job calls for someone on site, a visit is booked; if not, we price from photos, measurements and your artwork, then confirm the details once the artwork is checked. Around Perth, that covers postcode districts such as PH2 and PH1.

Also within reach of Perth

Tray signs in Blairgowrie and Rattray 14 mi
Tray signs in Crieff 16 mi
Tray signs in Cupar 17 mi
Tray signs in Glenrothes 17 mi
Tray signs in Dundee 18 mi

Start with a free quote: a handful of photos plus approximate widths and heights is enough for tray signs in Perth. You check and approve the proof, and only then is anything made.

More signs in Perth

All sign types in Perth · Tray signs across Perth and Kinross

Typical lead time	typically 3–4 weeks from proof approval, allowing for folding and coating
Typical lifespan	Many years; powder coat weathers better than wet paint
Materials	Folded aluminium with 50–75 mm returns, powder coated; acrylic or vinyl lettering

Tray signs in Perth