What is the typical timescale for tray signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Leicester.

Who carries out the work on tray signs in Leicester?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Do tray signs suit office buildings and business parks?

Yes. Trays suit entrances, canopies and plain cladding as well as shop fascias, and can be fixed to brick, render or cladding rails. For cladding we confirm the fixing method with the building owner first, since drilling some panel systems can affect how they perform.

What makes tray signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Leicester is £1,250–£3,450 per sign + VAT, confirmed after a survey or artwork check.

Can a tray sign cover an old fascia completely?

Yes, in most cases. A tray can be sized to the full fascia board with folded ends that wrap the corners, hiding the old timber. We still check the board is sound and fix through to solid structure, because hidden rot can loosen fixings over time.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

Tray signs in Leicester

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

The case for tray signs in Leicester

Clinics and salons in Leicester wanting a calm, premium look can get it from raised acrylic letters on a matt tray, unlit.
Where several Leicester shops share a parade, a charcoal tray with white letters stands apart from the printed panels around it.
An estate agent in Leicester may change window displays weekly but keep the fascia for years, which is where a durable powder coat pays back.

What tray signs cost in Leicester

Guide prices start from £1,250 and go up to £3,450 per sign, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Tray signs in Leicester: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Tray sign up to 3 m, vinyl lettering	£1,250 – £2,100	£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering	£1,850 – £3,450	£2,220 – £4,140
Push-through or routed letters (non-lit)	£350 – £950	£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Options for your Leicester project

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Light-ready tray

Deep enough for LED modules, with cable entry agreed, fitted unlit for now.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Do you need permission for a sign in Leicester?

Will you need permission? For a non-illuminated sign at your own business address in England, usually not, as long as it stays inside the deemed consent limits: letters no taller than 0.75 m (0.3 m in an area of special control) and nothing above the bottom of a first-floor window. Historic streets need more care. In a conservation area the details matter more, and fixing to a listed building usually needs listed building consent, with fixings into mortar joints rather than brick or stone faces generally preferred. We check with you before anything is ordered, and can prepare drawings and photos for an application, or submit it for you.

Covering Leicester and Leicestershire

Our service reaches Leicester and all of Leicestershire. The first step depends on the job: a site visit for signs that need measuring, fixing or wiring, or a photo-based quote for graphics and lettering where pictures and sizes tell us enough. Postcode districts around Leicester include LE1, LE4, LE5 and LE3.

Also within reach of Leicester

Ask for a free quote on tray signs in Leicester today. A couple of snapshots and rough dimensions help us price accurately, and you sign off the proof before we order or make anything.

More signs in Leicester

All sign types in Leicester · Tray signs across Leicestershire

Typical size	Up to about 5 m per run; longer fascias in jointed sections
Typical lead time	typically 3–4 weeks from proof approval, allowing for folding and coating
Materials	Folded aluminium with 50–75 mm returns, powder coated; acrylic or vinyl lettering