Smart Signs logo

Tray signs · Andover

Tray signs in Andover

This is a buyer's guide to tray signs in Andover: what is involved, what drives the price and how the consent rules work. Smart Signs is a UK-wide signage service. We survey, design and quote; the sign or graphics are then made by specialist fabricators and fitted under our contract, so you only ever deal with a single point of contact.

From £1,250 per sign + VAT · UK guide price
Charcoal tray sign with raised white letters 'MERIDIAN DENTAL' over a modern unit entrance.

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Practical reasons to consider tray signs in Andover

  • Where several Andover shops share a parade, a charcoal tray with white letters stands apart from the printed panels around it.
  • Professional practices in Andover, such as dentists, opticians and solicitors, may prefer a tray because a clean folded edge suggests care.
  • A modern Andover retail park unit with grey cladding suits a powder-coated tray matched to the window frames' RAL colour.

What tray signs cost in Andover

Below is the guide pricing we use for tray signs: from £1,250 up to £3,450 per sign, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Tray signs in Andover: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Tray sign up to 3 m, vinyl lettering£1,250 – £2,100£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering£1,850 – £3,450£2,220 – £4,140
Push-through or routed letters (non-lit)£350 – £950£420 – £1,140

Length matters most, because longer trays need joints, more coating and more fixing rail. Then come the lettering method, letter count, special or metallic powder coats, access height and removal of the old sign. Every figure is confirmed after survey and an artwork check.

Options for your Andover project

Light-ready tray

Deep enough for LED modules, with cable entry agreed, fitted unlit for now.

Tray with raised acrylic letters

Solid acrylic letters fixed proud of the face for depth and shadow.

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Do you need permission for a sign in Andover?

Advertisement consent in England comes from the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A sign is either excluded from control, has deemed consent, or needs express consent from the council's planning department. For a plain, unlit sign on your own premises, deemed consent usually applies when characters are 0.75 m tall or less (0.3 m in an area of special control) and the top edge is below the first-floor windows. Conservation areas need more care, and a listed building usually needs listed building consent as well; working without it can be a criminal offence. We confirm the route before you commit, and can prepare the drawings for an application or submit it for you.

Covering Andover and Hampshire

Yes, Andover is covered, as is the rest of Hampshire. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Addresses in SP10 and SP11 are all within our Andover coverage. Roughly 22 miles separate Andover from Southampton, which lies to the south.

Other towns near Andover

Photos, sizes and your logo are all we need to start. Send them over for a free, no-obligation quote on tray signs in Andover; you approve a scaled drawing before a single thing is made.

More signs in Andover

All sign types in Andover · Tray signs across Hampshire

Tray signs in Andover: questions

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Is Andover inside your coverage area for tray signs?

It is. We work throughout the UK rather than in a single region, so Andover and every part of Hampshire are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

Will the location in Andover affect the cost of tray signs?

Location is one factor among several, alongside size, material, access equipment and design time. Our guide range is £1,250–£3,450 per sign + VAT; any travel, parking or access costs for your site in Andover are included in the written quote we confirm after a survey or artwork check, so you can see them before you commit.

Can I change the lettering later?

That depends on the lettering method. Vinyl can be removed and replaced on site. Raised acrylic letters can be unscrewed and swapped, leaving holes to fill. Routed letters are cut into the face, so a change normally means a new tray face, which is worth knowing before you choose.

How soon after I approve the proof can the work on tray signs happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Andover once materials are ordered.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote