Smart Signs logo

Tray signs · Bolton

Tray signs in Bolton

Your enquiry about tray signs in Bolton goes to one team that handles everything: measuring, artwork, the consent check, the proof, the price and the arrangements for making and fitting. We work right across the UK rather than from a single patch, which is why the process described on this page is the same in Bolton as it is throughout Greater Manchester.

From £1,250 per sign + VAT · UK guide price
Charcoal tray sign with raised white letters 'MERIDIAN DENTAL' over a modern unit entrance.

Tray signs are fascia signs folded from aluminium sheet so the face turns back at the edges into returns, typically 50–75 mm deep, then powder coated and hung on concealed fixings.

Good reasons to look at tray signs in Bolton

  • Shoppers walking along a Bolton pavement see a sign side-on first, and tray returns give it a solid edge from exactly that angle.
  • If your Bolton premises might open into the evening one day, a light-ready tray avoids paying for a second sign later.
  • Businesses moving into a refurbished Bolton building can use a wrap-around tray to hide an uneven old fascia without stripping it out.

What tray signs cost in Bolton

Budgeting for tray signs? The guide below runs from £1,250 to £3,450 per sign. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Tray signs in Bolton: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Tray sign up to 3 m, vinyl lettering£1,250 – £2,100£1,500 – £2,520
Tray sign 3–5 m, raised acrylic lettering£1,850 – £3,450£2,220 – £4,140
Push-through or routed letters (non-lit)£350 – £950£420 – £1,140

Guide prices, supplied and fitted and excluding VAT, are £1,250 to £2,100 for a tray up to 3 m with vinyl lettering, and £1,850 to £3,450 for a 3–5 m tray with raised acrylic letters. Routed or push-through letters on a non-lit tray add a guide £350 to £950.

Options for your Bolton project

Routed tray with push-through letters

Letters cut through the face with acrylic pushed through, ready to light.

Tray with built-up letters

Fabricated metal letters on the tray face for a layered look.

Tray with vinyl lettering

Cut-vinyl text on a powder-coated tray: the entry point.

Do you need permission for a sign in Bolton?

In England, a non-illuminated sign on your own business premises usually falls under deemed consent, which means no application is needed provided the sign stays within set limits. The lettering and symbols should be no more than 0.75 m tall (0.3 m in an area of special control), and the top of the sign should sit no higher than the bottom of any first-floor window. Conservation areas and listed buildings need more care: a sign on a listed building usually also needs listed building consent. We check the position for your premises before you commit, and we can prepare the drawings and photos for an application or submit it for you.

Covering Bolton and Greater Manchester

Wherever you are in Greater Manchester, Bolton included, the service is identical. We arrange a survey when the sign is fixed to a building or needs power, and we work from photographs, drawings or the make and model of the vehicle when that is enough to price graphics accurately. In postcode terms, Bolton jobs typically fall in BL1, BL3, BL2 and BL4. From Manchester, Bolton is roughly 11 miles to the north-west.

Neighbouring towns

Get in touch about tray signs for your business in Bolton. Share photos, measurements and any artwork you already have; we will send a free quote and a proof to check, and nothing is made until you say yes.

More signs in Bolton

All sign types in Bolton · Tray signs across Greater Manchester

Tray signs in Bolton: questions

Can you handle tray signs for a business in Bolton?

Yes. Smart Signs covers Bolton and the rest of Greater Manchester as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

Why is there a price range for tray signs rather than one figure?

Because jobs vary. The guide of £1,250 to £3,450 per sign + VAT spans small, simple work at one end and larger, more involved work at the other. Size, material, finish, access, design time and any consent drawings push the figure up or down. A survey or artwork check lets us fix the price for your job in Bolton.

Is a tray sign heavier than a flat panel?

A little, but not by much. Aluminium is light, and most of the extra weight is in the returns and the fixing rail. What matters is fixing into sound masonry or a solid fascia structure, and we check that at survey before recommending a fixing method.

Do tray signs dent or scratch?

Powder-coated aluminium is tough, but a folded tray can dent if struck by a ladder or vehicle, and deep scratches expose bare metal. Touch-up paint is available in the RAL colour, though repairs are rarely invisible. On low fascias near loading areas, a higher fixing position helps.

How deep is a tray sign?

Returns are usually 50–75 mm, enough to hide a fixing rail and give a visible edge. Deeper trays are possible where you want room for LED modules later or need to cover an uneven fascia, and we set the depth at survey based on what is behind.

Can you work to an opening date in Bolton?

Tell us the date when you enquire and we will say plainly whether it looks realistic. Timescales typically depend on how soon the proof is approved, how long production takes and whether consent is needed, which can take several weeks on its own. We plan around your date where we can, but we do not promise one we cannot control.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote