Smart Signs logo

Totem & pylon signs · Surrey

Totem and pylon signs in Surrey

If you are comparing options for totem and pylon signs in Surrey, this page sets out the practical side: materials, guide prices, consent and what happens after you get in touch. Smart Signs designs, makes and fits signs and graphics throughout England, and Surrey is fully covered, from the larger towns to smaller places, business parks and industrial estates.

From £1,950 per totem + VAT · UK guide price
Tall grey aluminium totem with an orange stripe listing business-park tenants at a site entrance.

A totem sign is a free-standing sign on its own foundation, typically 1.5–4 m tall, used at site entrances and car parks to show a business name, tenants or directions where a wall sign won't be seen.

Why choose totem and pylon signs in Surrey?

  • Schools, surgeries and community buildings in Woking can use smaller totems at the gate to show names, opening hours and the way in.
  • If your Woking site entrance is close to a busy junction, keeping the totem outside the visibility splay matters as much as its looks.
  • On an industrial estate around Woking with several entrances, directional totems at each junction point deliveries to the right unit.

Guide prices in Surrey

Guide prices start from £1,950 and go up to £9,800 per totem, exclusive of VAT. The breakdown below shows where different sizes and options sit. Nothing is final until we have measured up or checked your artwork and sent a written quote.

Totem & pylon signs in Surrey: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Totem 1.5–2 m, non-lit£1,950 – £3,950£2,340 – £4,740
Totem 2.5–4 m, non-lit£3,950 – £7,500£4,740 – £9,000
Illuminated totem (lit panels or letters)£4,950 – £9,800£5,940 – £11,760

Height and face area drive the structure, foundation and wind-loading design, so they move the price most. Lighting, tenant panels, built-up letters, surfacing to break out and reinstate, ground conditions and consent drawings follow. Every figure is confirmed after a site survey and services check.

Totem and pylon signs in Surrey: permission and rules

A free-standing totem usually needs express advertisement consent from the council's planning department, especially if it is illuminated, tall or close to a road. In England, decisions usually take up to 8 weeks and consent is normally granted for 5 years. Illuminated totems cannot rely on deemed consent in conservation areas, National Parks, National Landscapes, the Broads or areas of special control. Councils also look at highway safety, so a site plan showing sightlines helps. Wales, Scotland and Northern Ireland have their own advertisement regulations and application routes. We can prepare the drawings, site plan and photos for an application, or submit it for you.

Options worth considering

Directional totem

Smaller site signs pointing visitors to receptions, bays and buildings.

Non-lit totem, 1.5–2 m

A compact entrance or forecourt sign in powder-coated aluminium.

Non-lit pylon, 2.5–4 m

A taller structure readable from a road, on a larger foundation.

Towns in Surrey

We take on totem and pylon signs in all of these towns across Surrey, and in the smaller places, estates and business parks between them. Select a town to open its own page.

Whether your business is in a busy centre or a quieter corner of Surrey, getting a quote for totem and pylon signs is free. Share photos and sizes, then approve the proof before anything is made.

Other signs in Surrey

Totem and pylon signs in Surrey: questions

Is Woking inside your coverage area for totem and pylon signs?

It is. We work throughout the UK rather than in a single region, so Woking and every part of Surrey are included. Where a survey is needed we arrange a visit; for graphics jobs we can often quote from photos and measurements. Either way, you get a proof and a written price first.

Is there a guide price for totem and pylon signs in Woking?

Yes: £1,950–£9,800 per totem + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

What drawings does the council need for a totem?

Councils usually ask for a location plan, a site plan showing the sign's position, and scaled elevations with dimensions, materials, colours and height above ground. For a lit totem, the illumination method and brightness are usually requested too. We can prepare these drawings and photos for you.

Will you need to dig up the car park?

A section of surfacing is broken out where the foundation goes, usually a little larger than the sign base. Once the totem is installed, the surface is reinstated to match as closely as practical. We plan the dig around traffic so the site can stay open where possible.

Can a totem go on a grass verge or soft ground?

Usually, yes, but soft or made-up ground may need a larger or deeper foundation, and the engineer may ask for a trial hole first near trees or recent fill. Verges beside public roads often belong to the highway authority, so check ownership before fixing the position.

Is there a typical lead time for totem and pylon signs in Woking?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote