Who carries out the work on totem and pylon signs in Stevenage?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Who maintains a totem sign?

The site owner or managing agent usually does. Clean the panels a few times a year, check that inserts are secure and base bolts tight, and look for vehicle damage. Lit totems also need the LEDs, drivers and time switch checked, with electrical faults dealt with by an electrician.

Can tenant panels be changed easily?

With slide-in or screw-fixed inserts, panel changes are straightforward, although taller totems still need safe access equipment. Many landlords control changes so the layout stays consistent. We can make replacement panels to the same template when a unit is relet.

Will you need to dig up the car park?

A section of surfacing is broken out where the foundation goes, usually a little larger than the sign base. Once the totem is installed, the surface is reinstated to match as closely as practical. We plan the dig around traffic so the site can stay open where possible.

Could the consent process affect the timing of my job in Stevenage?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

What makes totem and pylon signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Stevenage is £1,950–£9,800 per totem + VAT, confirmed after a survey or artwork check.

Totem and pylon signs in Stevenage

A totem sign is a free-standing sign on its own foundation, typically 1.5–4 m tall, used at site entrances and car parks to show a business name, tenants or directions where a wall sign won't be seen.

Why choose totem and pylon signs for a business in Stevenage?

When a business park near Stevenage hides its units behind landscaping, an entrance totem tells visitors which turning to take.
For a Stevenage dealership or garage set back from a main road, a pylon readable on approach gives drivers time to slow and turn.
If your Stevenage site entrance is close to a busy junction, keeping the totem outside the visibility splay matters as much as its looks.

What totem and pylon signs cost in Stevenage

Below is the guide pricing we use for totem and pylon signs: from £1,950 up to £9,800 per totem, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Totem & pylon signs in Stevenage: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Totem 1.5–2 m, non-lit	£1,950 – £3,950	£2,340 – £4,740
Totem 2.5–4 m, non-lit	£3,950 – £7,500	£4,740 – £9,000
Illuminated totem (lit panels or letters)	£4,950 – £9,800	£5,940 – £11,760

Height and face area drive the structure, foundation and wind-loading design, so they move the price most. Lighting, tenant panels, built-up letters, surfacing to break out and reinstate, ground conditions and consent drawings follow. Every figure is confirmed after a site survey and services check.

Options for your Stevenage project

Monolith

A solid, block-like form with built-up letters for prestige entrances.

Non-lit pylon, 2.5–4 m

A taller structure readable from a road, on a larger foundation.

Illuminated totem

Internally lit panels or routed and push-through letters with LED modules.

Totem and pylon signs in Stevenage: permission and rules

A free-standing totem usually needs express advertisement consent from the council's planning department, especially if it is illuminated, tall or close to a road. In England, decisions usually take up to 8 weeks and consent is normally granted for 5 years. Illuminated totems cannot rely on deemed consent in conservation areas, National Parks, National Landscapes, the Broads or areas of special control. Councils also look at highway safety, so a site plan showing sightlines helps. Wales, Scotland and Northern Ireland have their own advertisement regulations and application routes. We can prepare the drawings, site plan and photos for an application, or submit it for you.

Covering Stevenage and Hertfordshire

Our coverage takes in Stevenage, the rest of Hertfordshire and the rest of the UK. Fitted signs usually start with a site visit so the wall can be measured, the fixings checked and access planned. Window and vehicle graphics can often be priced from your own pictures instead. Postcode districts around Stevenage include SG1, SG2 and SG4. Roughly 19 miles separate Stevenage from Watford, which lies to the south-west.

Close to Stevenage

Get a free quote for totem and pylon signs: tell us what you need, attach pictures and approximate measurements, and we will come back with a price. Nothing is produced until you have approved the design proof.

More signs in Stevenage

All sign types in Stevenage · Totem and pylon signs across Hertfordshire

Typical lead time	typically 4–8 weeks after proof approval, plus any consent period
Typical size	1.5–4 m tall; width set by tenant panels and viewing distance
Consent	Usually needs express consent, especially when lit; decisions usually take up to 8 weeks