Will someone visit my premises in Keighley before quoting?

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.

Do trough lights work on raised letters?

Yes, though they cast small shadows below each letter, which can add depth. Fittings on longer arms soften the shadows, and the survey checks the letter depth and projection so the wash still reaches the lower part of the sign.

Can sign lighting be dimmed?

Yes, if dimmable drivers or fittings are specified. Dimming lets the brightness be set on site to suit the street, which helps where a consent condition limits brightness or neighbours live close by. Fixed-output fittings can't be dimmed later without swapping drivers.

What is the typical timescale for sign lighting and LED upgrades from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Keighley.

Can you light a sign someone else made?

Yes. External lighting works with most fascias, tray signs and lettering. The survey checks the wall above can take the fixings, the sign's finish will light well and there's a practical route for power. Old lightboxes are assessed for an LED retrofit instead.

What makes sign lighting and LED upgrades more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Keighley is £295–£1,450 per fascia + VAT, confirmed after a survey or artwork check.

Sign lighting and LED upgrades in Keighley

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Why choose sign lighting and LED upgrades for a business in Keighley?

Closing before the Keighley evening rush? A timer keeps the sign lit while commuters pass, then switches off.
An old fluorescent lightbox on a Keighley parade can be converted to LED, cutting running costs and tube changes.
On a retail park outside Keighley, wall washers can light the sign and entrance on dark winter afternoons.

What sign lighting and LED upgrades cost in Keighley

Prices below are guides, not quotes: £295 to £1,450 per fascia plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Sign lighting & LED upgrades in Keighley: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
LED trough light, up to 3 m	£295 – £750	£354 – £900
Spotlights (set of 3–4)	£345 – £895	£414 – £1,074
LED retrofit of an old fluorescent lightbox	£295 – £1,450	£354 – £1,740

Guide prices: £295–£750 + VAT for an LED trough light up to 3 m, £345–£895 + VAT for a set of 3–4 spotlights, and £295–£1,450 + VAT to retrofit an old fluorescent lightbox with LEDs. Prices exclude VAT and are confirmed after survey.

Options for your Keighley project

Glass neon to LED

An old neon layout remade in low-voltage LED flex.

Linear wall washer

A low-profile bar grazing light across the sign.

LED trough light

A slim bar on short arms washing the sign from above.

Consent for illuminated signs in Keighley

Plan for express consent. In England most internally illuminated and halo-lit signs on a fascia or projecting bracket need it, and deemed consent does not cover illuminated signs in conservation areas, National Parks, National Landscapes, the Broads or areas of special control. The council usually decides within 8 weeks, and consent normally lasts 5 years. Expect questions about brightness: many councils refer to ILP guidance PLG05, which sets maximum luminance by zone, and they expect steady light rather than flashing. We prepare scaled drawings and photo mock-ups for the application, or submit it for you, and an electrician completes the connection to BS 7671 and gives you the certificate.

Covering Keighley and West Yorkshire

From the middle of Keighley to the edges of West Yorkshire, the same survey, proof and fit process applies. If the job calls for someone on site, a visit is booked; if not, we price from photos, measurements and your artwork, then confirm the details once the artwork is checked. The Keighley postcode districts we quote for include BD21, BD22 and BD20. Roughly 15 miles separate Keighley from Leeds, which lies to the east.

Neighbouring towns

Free quotes for sign lighting and LED upgrades start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Keighley

All sign types in Keighley · Sign lighting and LED upgrades across West Yorkshire

Fixing / installation	Arms or brackets into the wall above the sign
Typical size	Fittings for fascias up to about 5 m
Typical lifespan	LED fittings often manufacturer-rated for 50,000+ hours