Can you light a sign someone else made?

Yes. External lighting works with most fascias, tray signs and lettering. The survey checks the wall above can take the fixings, the sign's finish will light well and there's a practical route for power. Old lightboxes are assessed for an LED retrofit instead.

Can you handle sign lighting and LED upgrades for a business in Esher?

Yes. Smart Signs covers Esher and the rest of Surrey as part of a UK-wide service. You send photos and rough sizes, we arrange a survey if the job needs one, then you receive a proof to scale and a fixed written price. Nothing is made or fitted until you have approved both.

How soon after I approve the proof can the work on sign lighting and LED upgrades happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for Esher once materials are ordered.

What will an LED retrofit save?

It depends on the old tubes, the hours lit and your electricity rate, but LED modules draw much less power for the same face. There are no tubes, starters or ballasts to replace either. Ask for old and new wattages to compare.

Can lighting be added to a rented shop?

Usually, with your landlord's written agreement, as most leases control fixings on the outside of the building. Advertisement consent may also be needed, and an electrician connects the lights to BS 7671. Fittings can be removed when the lease ends, and holes made good.

How much should I budget for sign lighting and LED upgrades in Esher?

As a guide, £295–£1,450 per fascia + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Sign lighting and LED upgrades in Esher

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Points in favour of sign lighting and LED upgrades in Esher

A painted fascia on an Esher high street can stay readable after dark with one slim trough light.
An old fluorescent lightbox on an Esher parade can be converted to LED, cutting running costs and tube changes.
Where flats sit above shops in Esher, downward-aimed, shielded fittings keep light on the sign and out of windows.

What sign lighting and LED upgrades cost in Esher

The figures in this table are guide prices, from £295 to £1,450 per fascia, and they exclude VAT. They are there to help you plan. A firm price follows the survey or artwork check and is agreed before any work starts.

Sign lighting & LED upgrades in Esher: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
LED trough light, up to 3 m	£295 – £750	£354 – £900
Spotlights (set of 3–4)	£345 – £895	£414 – £1,074
LED retrofit of an old fluorescent lightbox	£295 – £1,450	£354 – £1,740

Guide prices: £295–£750 + VAT for an LED trough light up to 3 m, £345–£895 + VAT for a set of 3–4 spotlights, and £295–£1,450 + VAT to retrofit an old fluorescent lightbox with LEDs. Prices exclude VAT and are confirmed after survey.

Options for your Esher project

LED lightbox retrofit

Tubes and ballasts swapped for LED modules and a new driver.

Glass neon to LED

An old neon layout remade in low-voltage LED flex.

Swan-neck spotlights

Curved arms with LED heads; suits painted and heritage fascias.

Consent for illuminated signs in Esher

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Covering Esher and Surrey

Our coverage takes in Esher, the rest of Surrey and the rest of the UK. Fitted signs usually start with a site visit so the wall can be measured, the fixings checked and access planned. Window and vehicle graphics can often be priced from your own pictures instead. Postcode districts around Esher include KT10, KT12, KT7 and KT8. Esher lies around 9 miles north-east of Woking.

Nearby towns we also cover

Want a firm figure? Use the quote form to send images and dimensions of the site or vehicle. We will price sign lighting and LED upgrades at no charge and send a proof for your approval before production begins.

More signs in Esher

All sign types in Esher · Sign lighting and LED upgrades across Surrey

Consent	Adding illumination can need advertisement consent
Materials	Aluminium LED fittings in black, white or silver
Typical size	Fittings for fascias up to about 5 m