Smart Signs logo

Sign lighting & LED upgrades · Epsom

Sign lighting and LED upgrades in Epsom

What does it take to get sign lighting and LED upgrades sorted in Epsom? Usually four steps: tell us what you need, let us measure or look at your photos, approve a proof and a fixed price, then the work goes ahead. Smart Signs designs, makes and fits signage and graphics for businesses throughout the UK, so those steps stay the same wherever your premises or vehicles are.

From £295 per fascia + VAT · UK guide price
Slim black LED trough light washing a 'WILLOW FLORIST' painted fascia with warm light at dusk

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Good reasons to look at sign lighting and LED upgrades in Epsom

  • A painted fascia on an Epsom high street can stay readable after dark with one slim trough light.
  • Pubs in Epsom with traditional painted boards can add swan-neck spotlights that suit the period look of the frontage.
  • Heritage frontages in Epsom may suit discreet external lighting, often easier to justify to planners than a new lit box.

What sign lighting and LED upgrades cost in Epsom

Below is the guide pricing we use for sign lighting and LED upgrades: from £295 up to £1,450 per fascia, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Sign lighting & LED upgrades in Epsom: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
LED trough light, up to 3 m£295 – £750£354 – £900
Spotlights (set of 3–4)£345 – £895£414 – £1,074
LED retrofit of an old fluorescent lightbox£295 – £1,450£354 – £1,740

Fascia length and fitting count drive the price, with access height, the cable route and a timer or photocell added where needed. Glass-neon conversions and very large boxes are quoted individually.

Options for your Epsom project

Linear wall washer

A low-profile bar grazing light across the sign.

Glass neon to LED

An old neon layout remade in low-voltage LED flex.

Swan-neck spotlights

Curved arms with LED heads; suits painted and heritage fascias.

Consent for illuminated signs in Epsom

Illuminated signs are treated more strictly than unlit ones in England. Deemed consent for illumination is limited, and it does not apply at all in conservation areas, National Parks, National Landscapes, the Broads or areas of special control, so most internally lit or halo-lit fascia and projecting signs need express consent from the council. Decisions usually take up to 8 weeks and consent is normally granted for 5 years. Councils commonly assess brightness against the Institution of Lighting Professionals' guidance PLG05, and lighting should be static. An electrician makes the final mains connection to BS 7671. We can prepare the drawings and photos for your application, or submit it for you.

Covering Epsom and Surrey

Our coverage takes in Epsom, the rest of Surrey and the rest of the UK. Fitted signs usually start with a site visit so the wall can be measured, the fixings checked and access planned. Window and vehicle graphics can often be priced from your own pictures instead. Around Epsom, that covers postcode districts such as KT18, KT17, KT19 and KT21. Roughly 12 miles separate Epsom from Woking, which lies to the west.

Close to Epsom

If sign lighting and LED upgrades could help your business in Epsom, the quote is free. Send pictures and sizes by form, phone or WhatsApp, and you will have a scaled design to approve before any work goes ahead.

More signs in Epsom

All sign types in Epsom · Sign lighting and LED upgrades across Surrey

Sign lighting and LED upgrades in Epsom: questions

What will an LED retrofit save?

It depends on the old tubes, the hours lit and your electricity rate, but LED modules draw much less power for the same face. There are no tubes, starters or ballasts to replace either. Ask for old and new wattages to compare.

Do trough lights work on raised letters?

Yes, though they cast small shadows below each letter, which can add depth. Fittings on longer arms soften the shadows, and the survey checks the letter depth and projection so the wash still reaches the lower part of the sign.

Will the lights bother the flats above?

They shouldn't if chosen and aimed well. Downward-facing fittings with cut-off optics keep light on the sign and out of the windows above, warm white looks softer than cool white, and a time switch turns everything off at a sensible hour.

Can you work to an opening date in Epsom?

Tell us the date when you enquire and we will say plainly whether it looks realistic. Timescales typically depend on how soon the proof is approved, how long production takes and whether consent is needed, which can take several weeks on its own. We plan around your date where we can, but we do not promise one we cannot control.

Who carries out the work on sign lighting and LED upgrades in Epsom?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Is there a guide price for sign lighting and LED upgrades in Epsom?

Yes: £295–£1,450 per fascia + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote