Can you light a sign someone else made?

Yes. External lighting works with most fascias, tray signs and lettering. The survey checks the wall above can take the fixings, the sign's finish will light well and there's a practical route for power. Old lightboxes are assessed for an LED retrofit instead.

What makes sign lighting and LED upgrades more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Hawick is £295–£1,450 per fascia + VAT, confirmed after a survey or artwork check.

Will the lights bother the flats above?

They shouldn't if chosen and aimed well. Downward-facing fittings with cut-off optics keep light on the sign and out of the windows above, warm white looks softer than cool white, and a time switch turns everything off at a sensible hour.

What colour of light suits a sign?

Warm white flatters creams, golds, reds and natural materials such as timber, while neutral white keeps blues, greens and crisp whites true. Very cool white can look harsh on painted signs. A sample fitting tested at dusk can settle it.

Who carries out the work on sign lighting and LED upgrades in Hawick?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Could the consent process affect the timing of my job in Hawick?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Sign lighting and LED upgrades in Hawick

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Practical reasons to consider sign lighting and LED upgrades in Hawick

On a retail park outside Hawick, wall washers can light the sign and entrance on dark winter afternoons.
An old fluorescent lightbox on a Hawick parade can be converted to LED, cutting running costs and tube changes.
For a Hawick business watching its budget, lighting the existing sign is a sensible first step into evening trade.

What sign lighting and LED upgrades cost in Hawick

Pricing for sign lighting and LED upgrades is worked out job by job, but the guide range is £295 to £1,450 per fascia + VAT. The table lists typical options. Your figure is confirmed only after a site survey or a check of the artwork you send.

Sign lighting & LED upgrades in Hawick: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
LED trough light, up to 3 m	£295 – £750	£354 – £900
Spotlights (set of 3–4)	£345 – £895	£414 – £1,074
LED retrofit of an old fluorescent lightbox	£295 – £1,450	£354 – £1,740

Guide prices: £295–£750 + VAT for an LED trough light up to 3 m, £345–£895 + VAT for a set of 3–4 spotlights, and £295–£1,450 + VAT to retrofit an old fluorescent lightbox with LEDs. Prices exclude VAT and are confirmed after survey.

Options for your Hawick project

Swan-neck spotlights

Curved arms with LED heads; suits painted and heritage fascias.

LED trough light

A slim bar on short arms washing the sign from above.

Glass neon to LED

An old neon layout remade in low-voltage LED flex.

Consent for illuminated signs in Hawick

A lit sign is the clearest case for applying first. Scotland's 1984 Advertisement Regulations treat illuminated signs differently from unlit ones, and express consent is usually needed for halo-lit letters, lightboxes and lit projecting signs. We check with the council before you commit to sign lighting and LED upgrades, then put together scaled drawings, photo mock-ups and lighting details, which you can submit via eDevelopment.scot or we can submit for you. Expect the council to look at brightness (PLG05 is the usual reference) and to prefer steady light, perhaps on a time switch. The mains connection is completed by an electrician to BS 7671.

Covering Hawick and the Scottish Borders

Businesses in Hawick and elsewhere in the Scottish Borders get exactly the service offered in every other part of the UK. Signs fixed to a building are surveyed on site before we quote firmly. For graphics on glass, walls or vehicles, photos are often enough to start, and we visit only if something needs a closer look. Addresses in TD9 are all within our Hawick coverage.

Also within reach of Hawick

The next step costs nothing: send us photos and sizes, and we will quote for sign lighting and LED upgrades free of charge. You see and approve the design first, so nothing is made on guesswork.

More signs in Hawick

All sign types in Hawick · Sign lighting and LED upgrades across the Scottish Borders

Typical lead time	typically 1–3 weeks after quote approval, plus consent
Typical lifespan	LED fittings often manufacturer-rated for 50,000+ hours
Materials	Aluminium LED fittings in black, white or silver