Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.
Good reasons to look at sign lighting and LED upgrades in Derby
- An old fluorescent lightbox on a Derby parade can be converted to LED, cutting running costs and tube changes.
- Where flats sit above shops in Derby, downward-aimed, shielded fittings keep light on the sign and out of windows.
- On a retail park outside Derby, wall washers can light the sign and entrance on dark winter afternoons.
What sign lighting and LED upgrades cost in Derby
The table shows guide prices for sign lighting and LED upgrades, starting from £295 and reaching about £1,450 per fascia. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.
| Item | Guide, ex VAT | Inc. VAT (20%) |
|---|---|---|
| LED trough light, up to 3 m | £295 – £750 | £354 – £900 |
| Spotlights (set of 3–4) | £345 – £895 | £414 – £1,074 |
| LED retrofit of an old fluorescent lightbox | £295 – £1,450 | £354 – £1,740 |
Fascia length and fitting count drive the price, with access height, the cable route and a timer or photocell added where needed. Glass-neon conversions and very large boxes are quoted individually.
Options for your Derby project
LED lightbox retrofit
Tubes and ballasts swapped for LED modules and a new driver.
Linear wall washer
A low-profile bar grazing light across the sign.
Glass neon to LED
An old neon layout remade in low-voltage LED flex.
Consent for illuminated signs in Derby
Illuminated signs are treated more strictly than unlit ones in England. Deemed consent for illumination is limited, and it does not apply at all in conservation areas, National Parks, National Landscapes, the Broads or areas of special control, so most internally lit or halo-lit fascia and projecting signs need express consent from the council. Decisions usually take up to 8 weeks and consent is normally granted for 5 years. Councils commonly assess brightness against the Institution of Lighting Professionals' guidance PLG05, and lighting should be static. An electrician makes the final mains connection to BS 7671. We can prepare the drawings and photos for your application, or submit it for you.
Covering Derby and Derbyshire
Yes, Derby is covered, as is the rest of Derbyshire. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. In postcode terms, Derby jobs typically fall in DE1, DE22, DE23 and DE21.
Neighbouring towns
- Sign lighting and LED upgrades in Belper 7 mi
- Sign lighting and LED upgrades in Ilkeston 8 mi
- Sign lighting and LED upgrades in Heanor 8 mi
- Sign lighting and LED upgrades in Ripley 8 mi
- Sign lighting and LED upgrades in Long Eaton 9 mi
Start with a free quote: a handful of photos plus approximate widths and heights is enough for sign lighting and LED upgrades in Derby. You check and approve the proof, and only then is anything made.
More signs in Derby
- Fascia signs in Derby
- Van sign-writing in Derby
- Fleet livery in Derby
- Illuminated built-up letters in Derby
- Lightbox signs in Derby
- Glass manifestation in Derby
- Totem and pylon signs in Derby
- Built-up 3D letters in Derby
All sign types in Derby · Sign lighting and LED upgrades across Derbyshire