Smart Signs logo

Sign lighting & LED upgrades · Lisburn

Sign lighting and LED upgrades in Lisburn

Sign lighting and LED upgrades for businesses in Lisburn: you send photos and measurements, we prepare the artwork and a proof, and once the price is confirmed in writing the job is produced by specialist fabricators and fitted by the installers we contract. Smart Signs covers the country as a whole, so businesses in Lisburn get the same survey, the same proof stage and the same written quote as anyone else.

From £295 per fascia + VAT · UK guide price
Slim black LED trough light washing a 'WILLOW FLORIST' painted fascia with warm light at dusk

Sign lighting is external or retrofitted lighting that makes an existing sign readable after dark: LED trough lights, swan-neck spotlights or wall washers, or LED modules replacing old lightbox tubes.

Practical reasons to consider sign lighting and LED upgrades in Lisburn

  • Closing before the Lisburn evening rush? A timer keeps the sign lit while commuters pass, then switches off.
  • On a retail park outside Lisburn, wall washers can light the sign and entrance on dark winter afternoons.
  • An old fluorescent lightbox on a Lisburn parade can be converted to LED, cutting running costs and tube changes.

What sign lighting and LED upgrades cost in Lisburn

Guide prices for sign lighting and LED upgrades run from £295 to £1,450 per fascia, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Sign lighting & LED upgrades in Lisburn: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
LED trough light, up to 3 m£295 – £750£354 – £900
Spotlights (set of 3–4)£345 – £895£414 – £1,074
LED retrofit of an old fluorescent lightbox£295 – £1,450£354 – £1,740

Guide prices: £295–£750 + VAT for an LED trough light up to 3 m, £345–£895 + VAT for a set of 3–4 spotlights, and £295–£1,450 + VAT to retrofit an old fluorescent lightbox with LEDs. Prices exclude VAT and are confirmed after survey.

Options for your Lisburn project

Glass neon to LED

An old neon layout remade in low-voltage LED flex.

Linear wall washer

A low-profile bar grazing light across the sign.

LED lightbox retrofit

Tubes and ballasts swapped for LED modules and a new driver.

Consent for illuminated signs in Lisburn

Expect to apply if you want light. In Northern Ireland, express consent is usually required for exterior illuminated signs under the 2015 NI Regulations, and the council is likely to consider brightness, hours and appearance, particularly in conservation areas or on listed buildings. We prepare the scaled drawings, lighting details and photo mock-ups for an NI Planning Portal application, or submit it on your behalf. Keep illumination static and within the PLG05 guidance, and use a time switch or photocell to control the hours. The mains connection is made by an electrician to BS 7671.

Covering Lisburn and County Antrim

Our service reaches Lisburn and all of County Antrim. The first step depends on the job: a site visit for signs that need measuring, fixing or wiring, or a photo-based quote for graphics and lettering where pictures and sizes tell us enough. Lisburn lies around 6.7 miles south-west of Belfast.

Close to Lisburn

Tell us what you have in mind for sign lighting and LED upgrades in Lisburn. Snap the frontage, window or vehicle, add approximate sizes and send it over. Your quote is free, and the proof always comes before any making.

More signs in Lisburn

All sign types in Lisburn · Sign lighting and LED upgrades across County Antrim

Sign lighting and LED upgrades in Lisburn: questions

What will an LED retrofit save?

It depends on the old tubes, the hours lit and your electricity rate, but LED modules draw much less power for the same face. There are no tubes, starters or ballasts to replace either. Ask for old and new wattages to compare.

How much should I budget for sign lighting and LED upgrades in Lisburn?

As a guide, £295–£1,450 per fascia + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Can sign lighting be dimmed?

Yes, if dimmable drivers or fittings are specified. Dimming lets the brightness be set on site to suit the street, which helps where a consent condition limits brightness or neighbours live close by. Fixed-output fittings can't be dimmed later without swapping drivers.

What do you need from me to quote for sign lighting and LED upgrades in Lisburn?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Can lighting be added to a rented shop?

Usually, with your landlord's written agreement, as most leases control fixings on the outside of the building. Advertisement consent may also be needed, and an electrician connects the lights to BS 7671. Fittings can be removed when the lease ends, and holes made good.

Can you work to an opening date in Lisburn?

Tell us the date when you enquire and we will say plainly whether it looks realistic. Timescales typically depend on how soon the proof is approved, how long production takes and whether consent is needed, which can take several weeks on its own. We plan around your date where we can, but we do not promise one we cannot control.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote