One-way vision film in Llantrisant

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Water fills the holes, blurring the view from inside, while droplets scatter the printed image. Clear laminate over the film seals the perforations, so rain runs off and the view clears once the glass dries, which is why laminate is standard for long-term use.

Fitting is typically scheduled once three things are in place: you have approved the proof, the materials are made or delivered, and any consent the job needs has been granted. For many jobs that is typically a few weeks from approval; illuminated or larger fabricated signs typically take longer, and consent decisions run to their own timetable.

In daylight, not easily: people outside see the print while you see out. After dark, with lights on inside, the film becomes see-through from the street and the image fades. For evening privacy, add blinds or use solid graphics in that area.

Yes. We start from the guide range, £32 to £62 per m² excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Usually, with care. Gently curved glass, such as many van and car rear screens, is fine. On factory-tinted privacy glass the film adds to the tint, so the view out can become too dark; 50/50 film and a sample check first are sensible.