One-way vision film in Rottingdean

Usually, with care. Gently curved glass, such as many van and car rear screens, is fine. On factory-tinted privacy glass the film adds to the tint, so the view out can become too dark; 50/50 film and a sample check first are sensible.

Yes: £32–£62 per m² + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Water fills the holes, blurring the view from inside, while droplets scatter the printed image. Clear laminate over the film seals the perforations, so rain runs off and the view clears once the glass dries, which is why laminate is standard for long-term use.

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

In daylight, not easily: people outside see the print while you see out. After dark, with lights on inside, the film becomes see-through from the street and the image fades. For evening privacy, add blinds or use solid graphics in that area.