How long does a printed face last?

Several years in most positions, though colours fade noticeably faster on a sunny south-facing frontage. Laminates and UV-resistant inks help slow fading, and reds and yellows usually go first. A box that's easy to re-face keeps future rebrands and refreshes affordable.

Can a lightbox go on bare brick?

Yes, if there's sound masonry to fix to. The box sits on brackets or rails anchored into the wall, with a cable entry drilled behind it. Render, timber boarding or old cladding may need checking or reinforcing first, which the survey covers.

Do lightboxes let in water and insects?

A well-made box is sealed around the face, with small drainage holes along the bottom so condensation can escape. LEDs run much cooler than tubes, so less heat draws insects in. Taking the face off occasionally to clean inside keeps the light even.

Is there a guide price for lightbox signs in Shrewsbury?

Yes: £1,250–£4,800 per lightbox + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

What do you need from me to quote for lightbox signs in Shrewsbury?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

What can delay lightbox signs in Shrewsbury?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Lightbox signs in Shrewsbury

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

Good reasons to look at lightbox signs in Shrewsbury

On a dimly lit Shrewsbury side street, a lightbox brings its own light and helps customers find the door.
Where a Shrewsbury shop has a long fascia, a flex-faced box spans it without the joins rigid acrylic sheets need.
Businesses with several sites across Shropshire can share one set of artwork, so the Shrewsbury branch matches the rest.

What lightbox signs cost in Shrewsbury

How much? Expect a guide range of £1,250–£4,800 per lightbox, VAT excluded. The rows below show what moves a job up or down that range, and the figure becomes firm once the survey or artwork check is done.

Lightbox signs in Shrewsbury: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Lightbox up to 3 m, printed face	£1,250 – £2,650	£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters	£2,450 – £4,800	£2,940 – £5,760
Replacement face for an existing lightbox	£295 – £950	£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Shrewsbury project

Shaped lightbox

Made to a logo or roundel outline instead of a rectangle.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Routed push-through face

Only the lettering glows, standing slightly proud of the face.

Consent for illuminated signs in Shrewsbury

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Covering Shrewsbury and Shropshire

We take on work in Shrewsbury, across Shropshire and throughout the UK. When a survey makes sense, typically for anything fixed at height or illuminated, we arrange a visit. Graphics are often priced from pictures and dimensions, with a survey added only if the photos leave questions. Postcode districts around Shrewsbury include SY1, SY2 and SY3. Shrewsbury lies around 13 miles west of Telford.

Also within reach of Shrewsbury

The next step costs nothing: send us photos and sizes, and we will quote for lightbox signs free of charge. You see and approve the design first, so nothing is made on guesswork.

More signs in Shrewsbury

All sign types in Shrewsbury · Lightbox signs across Shropshire

Fixing / installation	Brackets or rails on a sound fascia; stainless fixings
Materials	Aluminium extrusion frame, flex or opal acrylic face, LED modules
Typical size	Up to about 5 m long; often 100–150 mm deep