Smart Signs logo

Lightbox signs · Brecon

Lightbox signs in Brecon

What does it take to get lightbox signs sorted in Brecon? Usually four steps: tell us what you need, let us measure or look at your photos, approve a proof and a fixed price, then the work goes ahead. Smart Signs designs, makes and fits signage and graphics for businesses throughout the UK, so those steps stay the same wherever your premises or vehicles are.

From £1,250 per lightbox + VAT · UK guide price
Red and white lightbox 'GOLDEN NOODLE HOUSE' over a takeaway at night

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

Lightbox signs in Brecon: the practical benefits

  • When an old fluorescent box above a Brecon shop flickers, an LED conversion can cost far less than a new sign.
  • Businesses with several sites across Powys can share one set of artwork, so the Brecon branch matches the rest.
  • A Brecon takeaway trading mostly after dark keeps its name and number readable with a fully lit face.

What lightbox signs cost in Brecon

Prices below are guides, not quotes: £1,250 to £4,800 per lightbox plus VAT, depending on size, materials and access. We confirm the exact figure after a survey or an artwork check, and it is agreed before anything is made.

Lightbox signs in Brecon: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Lightbox up to 3 m, printed face£1,250 – £2,650£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters£2,450 – £4,800£2,940 – £5,760
Replacement face for an existing lightbox£295 – £950£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Brecon project

Replacement face

A new face cut to fit a sound existing box.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Printed flex face

Joint-free over long spans and simple to re-print later.

Consent for illuminated signs in Brecon

Adding light usually means adding an application. For an exterior illuminated sign in Wales, expect the council to want an express consent application in most cases; the 1992 Regulations (as amended) set the rules, and the council can confirm its timescales and conditions. Expect questions about how bright the sign is and when it is lit: steady light, a time switch or photocell, and luminance kept within the PLG05 guidance all help. We put together scaled drawings, photomontages and lighting details for you, or lodge the application ourselves if you prefer, and an electrician makes the final connection to BS 7671.

Covering Brecon and Powys

Yes, Brecon is covered, as is the rest of Powys. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Postcode districts around Brecon include LD3. From Newtown, Brecon is roughly 40 miles to the south.

Also within reach of Brecon

Start with a free quote: a handful of photos plus approximate widths and heights is enough for lightbox signs in Brecon. You check and approve the proof, and only then is anything made.

More signs in Brecon

All sign types in Brecon · Lightbox signs across Powys

Lightbox signs in Brecon: questions

How much should I budget for lightbox signs in Brecon?

As a guide, £1,250–£4,800 per lightbox + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Do lightboxes let in water and insects?

A well-made box is sealed around the face, with small drainage holes along the bottom so condensation can escape. LEDs run much cooler than tubes, so less heat draws insects in. Taking the face off occasionally to clean inside keeps the light even.

What is the typical timescale for lightbox signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Brecon.

Do you work across Powys or only in Brecon?

Across all of Powys, and the rest of the UK too. Brecon is simply one of the places we list, and enquiries from anywhere nearby follow exactly the same steps: photos or a survey, a scaled proof, a written price, then making and fitting once you sign off the design.

Can a lightbox go on bare brick?

Yes, if there's sound masonry to fix to. The box sits on brackets or rails anchored into the wall, with a cable entry drilled behind it. Render, timber boarding or old cladding may need checking or reinforcing first, which the survey covers.

Can the face be changed later?

Yes, which is one of the main advantages of a lightbox. Flex faces unclip or untension and acrylic faces slide or lift out, so a new design can go in without moving the box. Keep the face dimensions from handover for easy reordering.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote