Smart Signs logo

Lightbox signs · Brough

Lightbox signs in Brough

Your enquiry about lightbox signs in Brough goes to one team that handles everything: measuring, artwork, the consent check, the proof, the price and the arrangements for making and fitting. We work right across the UK rather than from a single patch, which is why the process described on this page is the same in Brough as it is throughout the East Riding of Yorkshire.

From £1,250 per lightbox + VAT · UK guide price
Red and white lightbox 'GOLDEN NOODLE HOUSE' over a takeaway at night

A lightbox sign is a shallow enclosed box with a translucent face and LED lighting inside, so the whole panel, or just lettering routed into it, glows evenly at night.

What you gain from lightbox signs in Brough

  • Taking over a franchise or a new lease in Brough? A replacement face keeps the existing box and wiring.
  • Late-opening barbers and cafés in Brough can use routed faces so only the name glows, for a cleaner look.
  • A Brough takeaway trading mostly after dark keeps its name and number readable with a fully lit face.

What lightbox signs cost in Brough

Use these figures to budget: £1,250 to £4,800 per lightbox is the guide range, with VAT added on top. Each line in the table is indicative only, and your exact price is confirmed after a survey or once we have looked over the artwork.

Lightbox signs in Brough: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
Lightbox up to 3 m, printed face£1,250 – £2,650£1,500 – £3,180
Lightbox 3–5 m, routed and push-through letters£2,450 – £4,800£2,940 – £5,760
Replacement face for an existing lightbox£295 – £950£354 – £1,140

Guide prices: £1,250–£2,650 + VAT for a box up to 3 m with a printed face, and £2,450–£4,800 + VAT for a 3–5 m box with push-through letters. A replacement face is a guide £295–£950 + VAT. Prices exclude VAT and are confirmed after survey.

Options for your Brough project

Replacement face

A new face cut to fit a sound existing box.

Double-sided box

Lit on both faces, for gable ends, canopies or posts.

Printed flex face

Joint-free over long spans and simple to re-print later.

Consent for illuminated signs in Brough

Illuminated signs are treated more strictly than unlit ones in England. Deemed consent for illumination is limited, and it does not apply at all in conservation areas, National Parks, National Landscapes, the Broads or areas of special control, so most internally lit or halo-lit fascia and projecting signs need express consent from the council. Decisions usually take up to 8 weeks and consent is normally granted for 5 years. Councils commonly assess brightness against the Institution of Lighting Professionals' guidance PLG05, and lighting should be static. An electrician makes the final mains connection to BS 7671. We can prepare the drawings and photos for your application, or submit it for you.

Covering Brough and the East Riding of Yorkshire

Our coverage takes in Brough, the rest of the East Riding of Yorkshire and the rest of the UK. Fitted signs usually start with a site visit so the wall can be measured, the fixings checked and access planned. Window and vehicle graphics can often be priced from your own pictures instead. The Brough postcode districts we quote for include HU15 and HU14. Roughly 9.7 miles separate Brough from Hull, which lies to the east.

Also within reach of Brough

Free quotes for lightbox signs start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Brough

All sign types in Brough · Lightbox signs across the East Riding of Yorkshire

Lightbox signs in Brough: questions

What makes lightbox signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Brough is £1,250–£4,800 per lightbox + VAT, confirmed after a survey or artwork check.

Can a lightbox go on bare brick?

Yes, if there's sound masonry to fix to. The box sits on brackets or rails anchored into the wall, with a cable entry drilled behind it. Render, timber boarding or old cladding may need checking or reinforcing first, which the survey covers.

What is the typical timescale for lightbox signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Brough.

Can the existing wiring be reused?

Often the existing supply, switch and timer can be reused, provided an electrician checks them first. New LED drivers usually replace the old control gear inside the box. If the circuit is old or untested, the electrician will advise before connecting to BS 7671.

Do you cover smaller places near Brough as well?

Yes. Our coverage is not limited to Brough itself: nearby towns, industrial estates and business parks across the East Riding of Yorkshire are included too. The process does not change with the postcode. Send photos and approximate sizes, and we will tell you whether a site visit is needed before we can give you a fixed price.

Why does our old lightbox flicker?

In an older box it's usually failing fluorescent tubes, starters or ballasts, and replacing them one at a time rarely lasts. Patchy light can also mean water has got in. Converting the box to LED fixes the cause, if the frame is sound.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote