LED neon signs in Ross-on-Wye

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

Not with a decent driver. LED neon gives a steady light, without the hum ageing glass-neon transformers can make. If a sign starts flickering, a loose connector or failing driver is the usual cause, and both are simple to replace.

As a guide, £245–£1,250 per sign + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

The driver is the most common failure and is quick to swap. If a section of flex fails, it can usually be cut out and replaced or the run reconnected, rather than remaking the whole sign. Keep the driver details from handover.

Very little, because LED flex draws a modest wattage per metre. For an estimate, multiply the driver's rating in kilowatts by the hours lit and your price per kilowatt-hour. A timer plug stops it running overnight when nobody's there to see it.

If the job needs it, yes. For signs fixed to a building, anything illuminated or work at height, we arrange a survey to measure, check the wall and plan access. For window graphics, lettering and many vehicle jobs, clear photos with measurements are often enough, and we only visit if something needs a closer look.