Smart Signs logo

LED neon signs · Welling

LED neon signs in Welling

Need LED neon signs in Welling? Start with a few photos and rough sizes. From there we work out the materials, check whether any consent rules apply, draw up a design to scale and give you a written price. Nothing is made until you approve it. Smart Signs designs, makes and fits signage nationwide, and Welling sits comfortably inside that coverage.

From £245 per sign + VAT · UK guide price
Warm white and pink LED neon script 'good things take time' on a green tiled café wall

An LED neon sign is a logo or lettering formed from flexible LED tube that imitates glass neon, running at 12 or 24 volts and usually mounted on an acrylic backboard.

Reasons to choose LED neon signs in Welling

  • Gyms and studios in Welling can put bold neon words on training walls, where the low-voltage flex stays cool.
  • Behind the counter of a Welling bar, warm-white or pink LED neon adds atmosphere without any fragile glass tubes.
  • A Welling restaurant with a covered terrace can use outdoor-rated neon, sealed against rain and hard-wired by an electrician.

What LED neon signs cost in Welling

The table shows guide prices for LED neon signs, starting from £245 and reaching about £1,250 per sign. All figures exclude VAT. Your own price is confirmed after we have seen the site or the artwork, so treat these as a starting point.

LED neon signs in Welling: guide prices, supplied and fitted
ItemGuide, ex VATInc. VAT (20%)
LED neon sign up to 600 mm£245 – £495£294 – £594
LED neon sign 600 mm–1.2 m£450 – £1,250£540 – £1,500
Outdoor-rated version£150 – £450£180 – £540

Guide prices: £245–£495 + VAT for a sign up to 600 mm, and £450–£1,250 + VAT for 600 mm–1.2 m. An outdoor-rated version adds a guide £150–£450 + VAT. Prices exclude VAT and are confirmed after an artwork check.

Options for your Welling project

Outdoor-rated neon

Sealed flex and driver, hard-wired by an electrician.

Wall-mounted sign

On stand-offs through a clear or coloured acrylic board.

Colour-changing RGB

One sign, many colours, set from a remote controller.

LED neon signs in Welling: permission and rules

A neon sign on an inside wall, away from the windows, is usually outside advertisement control. Once it's visible from the street, on a fascia, canopy or just behind the glass, it can count as an illuminated advertisement. In England, lit signs get only limited deemed consent, and none in conservation areas, National Parks, National Landscapes, the Broads or areas of special control; an express consent decision usually takes up to 8 weeks. Keep street-facing signs static. Wales, Scotland and Northern Ireland have their own regulations. We can prepare the drawings and photos for an application, or submit it for you.

Covering Welling and Greater London

Yes, Welling is covered, as is the rest of Greater London. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Around Welling, that covers postcode districts such as DA16, DA6, DA15 and DA7. Roughly 11 miles separate Welling from central London, which lies to the west.

Also within reach of Welling

Free quotes for LED neon signs start with your pictures. Measure roughly, take a few shots from the street or around the vehicle, and send them to us. We prepare a proof for you to approve before anything is produced.

More signs in Welling

All sign types in Welling · LED neon signs across Greater London

LED neon signs in Welling: questions

Is there a guide price for LED neon signs in Welling?

Yes: £245–£1,250 per sign + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Does LED neon flicker or buzz?

Not with a decent driver. LED neon gives a steady light, without the hum ageing glass-neon transformers can make. If a sign starts flickering, a loose connector or failing driver is the usual cause, and both are simple to replace.

What is the typical timescale for LED neon signs from enquiry to fitting?

A quote typically follows once we have your photos or have surveyed the site, and making and fitting is typically booked a few weeks after you approve the proof. Where advertisement consent applies, that decision has to come through before anything goes up, which can add several weeks. We give you an expected timescale with your quote for Welling.

What do you need from me to quote for LED neon signs in Welling?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

What if part of the sign fails?

The driver is the most common failure and is quick to swap. If a section of flex fails, it can usually be cut out and replaced or the run reconnected, rather than remaking the whole sign. Keep the driver details from handover.

Can you copy handwriting?

Yes. A clear scan or photo is traced into a single-line path the flex can follow. Very fine loops and tight joins may be simplified slightly because of the flex's minimum bend radius, and the proof shows exactly how the line will look.

Free quote · scale proof · fixed price

Ready to be seen?

Send a photo of your frontage or vehicle and a rough size. We’ll come back with ideas, a guide price and the next step.

Call WhatsApp Free quote