How much should I budget for illuminated projecting signs in Sunbury-on-Thames?

As a guide, £695–£2,250 per sign + VAT. Where your job falls in that range depends on size, materials, access height, whether old signage has to come off and how much design work is involved. We confirm a fixed price after a survey or artwork check, before anything is ordered.

Who carries out the work on illuminated projecting signs in Sunbury-on-Thames?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

Is there a typical lead time for illuminated projecting signs in Sunbury-on-Thames?

Yes, though it varies with the job. The lead time typically runs from the day you approve the proof, not from the first enquiry, and is typically a few weeks. Survey visits, artwork changes and any consent application sit before that point, so getting photos, sizes and logo files to us early typically shortens the overall timescale.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

Illuminated projecting signs in Sunbury-on-Thames

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Good reasons to look at illuminated projecting signs in Sunbury-on-Thames

Chains across Surrey can use one lit roundel design, so a Sunbury-on-Thames site is recognised from the street's end.
Before you commit to a lit design in a historic part of Sunbury-on-Thames, we check the council's approach to projecting signs.
Corner premises in Sunbury-on-Thames can put a projecting sign on the side wall to catch people coming from the cross street.

What illuminated projecting signs cost in Sunbury-on-Thames

The figures in this table are guide prices, from £695 to £2,250 per sign, and they exclude VAT. They are there to help you plan. A firm price follows the survey or artwork check and is agreed before any work starts.

Illuminated projecting signs in Sunbury-on-Thames: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Options for your Sunbury-on-Thames project

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Shaped sign

Cut to a logo, symbol or product outline.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Consent for illuminated signs in Sunbury-on-Thames

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Covering Sunbury-on-Thames and Surrey

We cover Sunbury-on-Thames and every other part of Surrey as part of a UK-wide service. Where a survey is needed, we arrange a visit to measure and photograph the site; for many graphics and vehicle jobs, clear photos and measurements are enough to quote from. Around Sunbury-on-Thames, that covers postcode districts such as TW16, TW17, KT12 and KT8. Sunbury-on-Thames is about 8.5 miles north-east of Woking.

Nearby towns we also cover

Ask for a free quote on illuminated projecting signs in Sunbury-on-Thames today. A couple of snapshots and rough dimensions help us price accurately, and you sign off the proof before we order or make anything.

More signs in Sunbury-on-Thames

All sign types in Sunbury-on-Thames · Illuminated projecting signs across Surrey

Typical lead time	typically 3–5 weeks after proof approval, plus permissions
Consent	Express consent nearly always; a highway licence may apply
Typical lifespan	LEDs manufacturer-rated for long life; check fixings yearly