Who carries out the work on illuminated projecting signs in Perth?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Does the price of illuminated projecting signs in Perth include VAT?

No. Our guide range of £695–£2,250 per sign excludes VAT, which is added to the quote. The final figure depends on size, materials, access, removal of existing signage or graphics and the artwork needed, and we confirm it in writing after a survey or once we have checked your files.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

Can you reuse our existing bracket?

Sometimes. If the bracket is sound, well placed and strong enough, reusing it saves cost and avoids fresh holes. Rust at the wall plate, cracked masonry, missing fixings or no route for a cable usually mean a new bracket is safer.

How long does it all take?

Making and fitting typically takes 3–5 weeks after you approve the proof. Allow for advertisement consent first, usually up to 8 weeks for a decision, plus any highway licence, which runs on the authority's own timetable. Applications can be prepared in parallel.

Could the consent process affect the timing of my job in Perth?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Illuminated projecting signs in Perth and Kinross

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Perth and Kinross?

Chains across Perth and Kinross can use one lit roundel design, so a Perth site is recognised from the street's end.
Where a Perth street is busy with vans and buses, setting the sign high and back from the kerb matters.
Before you commit to a lit design in a historic part of Perth, we check the council's approach to projecting signs.

Guide prices in Perth and Kinross

Here is the price picture for illuminated projecting signs in Perth and Kinross: a guide of £695 to £2,250 per sign, with VAT on top. The rows below give more detail. A survey or artwork check comes first, and then we confirm the price in writing.

Illuminated projecting signs in Perth and Kinross: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in Perth and Kinross

A lit sign is the clearest case for applying first. Scotland's 1984 Advertisement Regulations treat illuminated signs differently from unlit ones, and express consent is usually needed for halo-lit letters, lightboxes and lit projecting signs. We check with the council before you commit to illuminated projecting signs, then put together scaled drawings, photo mock-ups and lighting details, which you can submit via eDevelopment.scot or we can submit for you. Expect the council to look at brightness (PLG05 is the usual reference) and to prefer steady light, perhaps on a time switch. The mains connection is completed by an electrician to BS 7671.

Options worth considering

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Square or rectangular

More face area for a name and strapline.

Towns in Perth and Kinross

Find your town in the list to open its page for illuminated projecting signs. If it is not listed, ask anyway: our coverage is UK-wide, not limited to these places in Perth and Kinross.

A free, written quote for illuminated projecting signs is one message away. Send the details from anywhere in Perth and Kinross and we will reply with a price, then a proof you approve before work begins.