Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

Who carries out the work on illuminated projecting signs in Scarborough?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

Could the consent process affect the timing of my job in Scarborough?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Can I get a fixed price for illuminated projecting signs in Scarborough before committing?

Yes. We start from the guide range, £695 to £2,250 per sign excluding VAT, then measure up or look at your photos and artwork. That gives a fixed written price reflecting the real size, materials, access and any design or consent work. You only commit once you accept that price and approve the proof.

Illuminated projecting signs in Scarborough

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Good reasons to look at illuminated projecting signs in Scarborough

For a pharmacy or late-opening shop in Scarborough, a lit projecting sign helps people searching the street after dark.
Corner premises in Scarborough can put a projecting sign on the side wall to catch people coming from the cross street.
On a narrow Scarborough street, people walking along the pavement often see a projecting sign before they can read any fascia.

What illuminated projecting signs cost in Scarborough

Budgeting for illuminated projecting signs? The guide below runs from £695 to £2,250 per sign. VAT is extra. Size, materials and access decide where your job lands, and we confirm it in writing after surveying or checking the artwork.

Illuminated projecting signs in Scarborough: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Options for your Scarborough project

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Routed push-through

Painted metal faces where only lettering and logo glow.

Shaped sign

Cut to a logo, symbol or product outline.

Consent for illuminated signs in Scarborough

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Covering Scarborough and North Yorkshire

Coverage is nationwide, which means Scarborough and the surrounding parts of North Yorkshire are included as standard. Anything fixed to a building normally needs someone on site to measure and check fixings and access; simpler graphics can usually be quoted from images you send. The Scarborough postcode districts we quote for include YO12 and YO11. Scarborough lies around 35 miles north-east of York.

Other towns near Scarborough

Illuminated projecting signs in Bridlington 16 mi

Photos, sizes and your logo are all we need to start. Send them over for a free, no-obligation quote on illuminated projecting signs in Scarborough; you approve a scaled drawing before a single thing is made.

More signs in Scarborough

All sign types in Scarborough · Illuminated projecting signs across North Yorkshire

Typical size	Up to about 800 mm across, double-sided
Fixing / installation	Wall plate into solid masonry; cable inside the bracket arm
Consent	Express consent nearly always; a highway licence may apply