Will the sign swing in the wind?

It shouldn't. A lit box is fixed rigidly to its bracket rather than hung on chains, so it stays still in normal winds, with the bracket and fixings sized for its weight and exposure. Traditional hanging signs move; lit ones are fixed solid.

Who carries out the work on illuminated projecting signs in Elgin?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Does the sign need its own supply?

It needs a supply, though not necessarily a new circuit. An electrician usually takes a switched, fused feed from inside the building close to the bracket, often sharing a time switch with your fascia lighting, and certifies the connection to BS 7671.

What can delay illuminated projecting signs in Elgin?

The usual causes are artwork changes after the proof stage, waiting for consent, access arrangements such as a council licence for scaffolding on the pavement, and weather for outdoor fitting. Jobs typically run smoothly once the proof is approved and any consent is in place, but we do not promise dates that depend on things outside our control.

What makes illuminated projecting signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in Elgin is £695–£2,250 per sign + VAT, confirmed after a survey or artwork check.

How long does it all take?

Making and fitting typically takes 3–5 weeks after you approve the proof. Allow for advertisement consent first, usually up to 8 weeks for a decision, plus any highway licence, which runs on the authority's own timetable. Applications can be prepared in parallel.

Illuminated projecting signs in Moray

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Moray?

Before you commit to a lit design in a historic part of Elgin, we check the council's approach to projecting signs.
Chains across Moray can use one lit roundel design, so an Elgin site is recognised from the street's end.
On a narrow Elgin street, people walking along the pavement often see a projecting sign before they can read any fascia.

Guide prices in Moray

Guide prices for illuminated projecting signs run from £695 to £2,250 per sign, excluding VAT. The table below breaks that down; your actual price is fixed in writing once we have surveyed the site or checked the artwork.

Illuminated projecting signs in Moray: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Guide prices: £695–£1,450 + VAT for a round or square lit projecting sign, and £1,250–£2,250 + VAT for a shaped or halo-lit design, each up to about 800 mm with a bracket. Prices exclude VAT and are confirmed after survey and artwork check.

Consent for illuminated signs in Moray

Illumination brings Scottish signs firmly into the consent process. Under the 1984 Scotland Regulations, internally lit or halo-lit fascia and projecting signs usually need express consent; the council decides, and listed buildings or conservation areas add an extra layer, with listed building consent usually required on a listed building. Keep the light static and the luminance within the PLG05 guidance the council is likely to reference. LED modules and drivers run at low voltage, while the final connection is made to BS 7671 by an electrician. We confirm the route before you commit and can handle the drawings or the eDevelopment.scot submission.

Options worth considering

Routed push-through

Painted metal faces where only lettering and logo glow.

Round lit sign

A roundel lit through opal faces, readable from both directions.

Square or rectangular

More face area for a name and strapline.

Towns in Moray

Towns in Moray we cover for illuminated projecting signs are listed below. Each has its own page with guide prices and the steps involved, and if your town is not listed, we still cover it.

Start your illuminated projecting signs enquiry for Moray now: images and rough measurements help us price accurately. Quotes cost nothing, and you see and approve the design before production starts.