Who carries out the work on illuminated projecting signs in East Kilbride?

The work on site is done by installers working under our contract, and anything that needs making is produced by specialist fabricators. You deal with Smart Signs throughout: we take the enquiry, survey, prepare the design and quote, check consent and coordinate the fitting, so there is one point of contact from first message to handover.

Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

How soon after I approve the proof can the work on illuminated projecting signs happen?

Typically within a few weeks, depending on what has to be made. Printed and cut graphics are typically produced sooner than fabricated letters, trays or illuminated signs, which need more fabrication time. If the job needs advertisement consent, fitting waits for the council's decision. We confirm an expected date for East Kilbride once materials are ordered.

What makes illuminated projecting signs more or less expensive?

Size and quantity come first, then the material or film, any lighting, the height of the work and the equipment needed to reach it, and the state of the surface or old sign being replaced. Against that, the guide for a job in East Kilbride is £695–£2,250 per sign + VAT, confirmed after a survey or artwork check.

Illuminated projecting signs in Lanarkshire

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Why choose illuminated projecting signs in Lanarkshire?

A lit roundel tells people an East Kilbride pub or restaurant is open on winter evenings, when fascias fall into shadow.
Corner premises in East Kilbride can put a projecting sign on the side wall to catch people coming from the cross street.
Before you commit to a lit design in a historic part of East Kilbride, we check the council's approach to projecting signs.

Guide prices in Lanarkshire

The figures in this table are guide prices, from £695 to £2,250 per sign, and they exclude VAT. They are there to help you plan. A firm price follows the survey or artwork check and is agreed before any work starts.

Illuminated projecting signs in Lanarkshire: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Shape, lighting style and bracket design make the biggest difference. Wall construction, cable route, access equipment, pavement or highway licences and council fees are listed separately.

Consent for illuminated signs in Lanarkshire

Exterior illuminated signs in Scotland usually need express advertisement consent from the council under the Town and Country Planning (Control of Advertisements) (Scotland) Regulations 1984, as amended. Applications are normally made through eDevelopment.scot, and the council can confirm its timescales and any conditions on hours or brightness. Brightness is commonly judged against the ILP's PLG05 guidance, and static lighting is expected. If the building is listed, listed building consent is usually needed as well. An electrician makes the final mains connection to BS 7671 and you receive the certificate. We prepare drawings and photos for the application, or submit it for you.

Options worth considering

Routed push-through

Painted metal faces where only lettering and logo glow.

Square or rectangular

More face area for a name and strapline.

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Towns in Lanarkshire

Illuminated projecting signs across Lanarkshire, town by town. Follow a link for the page covering your town; anywhere else in Lanarkshire is handled in exactly the same way.

Anywhere in Lanarkshire, the first step is the same: send photos and rough sizes for a free quote on illuminated projecting signs. You approve a proof to scale before anything is made.