Could the consent process affect the timing of my job in Sevenoaks?

It can. Not every job needs an application, but where express consent is required the council's decision typically takes several weeks, and fitting typically waits until it is granted. We check this at the start, so the timetable you receive with your quote allows for consent where it applies, along with the proof approval stage.

Are lit signs allowed on listed buildings?

Sometimes, but expect extra scrutiny. You'll usually need listed building consent as well as advertisement consent, and councils may favour halo-lit or externally lit designs and traditional brackets on historic frontages. Cable routes and fixings are planned to avoid damaging historic fabric.

Can each side show something different?

Yes. The two faces are separate, so one side can carry your logo and the other a name or service, though many businesses keep both identical so the sign reads the same from either direction. Any difference should be shown on the consent drawings.

How far can a projecting sign stick out?

There's no single UK figure. It depends on pavement width, clear height, the council's shopfront guidance and the highway authority's view. Lit projecting signs are usually modest, stopping well short of the kerb, and the survey records the pavement width for the drawings.

What do you need from me to quote for illuminated projecting signs in Sevenoaks?

Photos are the most useful start: the whole frontage, window or vehicle, plus a close-up of the area involved. Add rough measurements, your logo or artwork if you have it, and the address. From that we can say whether a survey visit is needed and send a written quote, followed by a proof for you to approve.

Is there a guide price for illuminated projecting signs in Sevenoaks?

Yes: £695–£2,250 per sign + VAT is our guide range. It is not a fixed quote, because no two jobs are the same size or on the same surface. The area covered, materials, the number of letters or panels, removal of anything old and access all change the figure, which we confirm after seeing the site or artwork.

Illuminated projecting signs in Sevenoaks

An illuminated projecting sign is a double-sided sign fixed at right angles to the building on a bracket, with LEDs inside or behind it, so people approaching along the pavement can read it.

Illuminated projecting signs in Sevenoaks: the practical benefits

Chains across Kent can use one lit roundel design, so a Sevenoaks site is recognised from the street's end.
For a pharmacy or late-opening shop in Sevenoaks, a lit projecting sign helps people searching the street after dark.
Where a Sevenoaks street is busy with vans and buses, setting the sign high and back from the kerb matters.

What illuminated projecting signs cost in Sevenoaks

Below is the guide pricing we use for illuminated projecting signs: from £695 up to £2,250 per sign, before VAT. These are not fixed quotes. A written price follows once measurements are taken and your artwork has been checked.

Illuminated projecting signs in Sevenoaks: guide prices, supplied and fitted
Item	Guide, ex VAT	Inc. VAT (20%)
Round or square lit projecting sign	£695 – £1,450	£834 – £1,740
Shaped or halo-lit projecting sign	£1,250 – £2,250	£1,500 – £2,700

Shape, lighting style and bracket design make the biggest difference. Wall construction, cable route, access equipment, pavement or highway licences and council fees are listed separately.

Options for your Sevenoaks project

Round lit sign

A roundel lit through opal faces, readable from both directions.

Halo-lit projecting

Solid letters lit from behind against a backing plate.

Square or rectangular

More face area for a name and strapline.

Consent for illuminated signs in Sevenoaks

Lighting a sign changes the consent picture in England. Under the 2007 Advertisement Regulations, deemed consent for illuminated signs is narrow and is excluded in conservation areas, National Parks, National Landscapes, the Broads and areas of special control; in practice most lit fascia and projecting signs need express consent. Allow up to 8 weeks for a decision, with consent normally running for 5 years. Keep the light static and at sensible levels, with PLG05 the usual reference for brightness, and use a time switch or photocell to control the hours. We check before you commit, can handle the application drawings or the submission, and arrange an electrician for the BS 7671 connection.

Covering Sevenoaks and Kent

Yes, Sevenoaks is covered, as is the rest of Kent. For signs that are fixed to a wall or wired in, we arrange a visit to survey first. For window film, lettering or vehicle graphics, a set of photos with measurements is often all we need to put a price together. Addresses in TN13 and TN14 are all within our Sevenoaks coverage. Roughly 14 miles separate Sevenoaks from Maidstone, which lies to the east.

Also within reach of Sevenoaks

Want a firm figure? Use the quote form to send images and dimensions of the site or vehicle. We will price illuminated projecting signs at no charge and send a proof for your approval before production begins.

More signs in Sevenoaks

All sign types in Sevenoaks · Illuminated projecting signs across Kent

Fixing / installation	Wall plate into solid masonry; cable inside the bracket arm
Typical lead time	typically 3–5 weeks after proof approval, plus permissions
Typical size	Up to about 800 mm across, double-sided